TechCraft CRE60B 60-Inch Wide Flat Panel TV Credenza - Black

• 60-inch wide credenza
• Fits most 60-inch and smaller flat-panel televisions
• Ample storage space and wire management capability
• Beautiful framed doors conceal components
• 22.38" H x 59.88" W x 19.75" D
• 22.38 x 59.88 x 19.75 Inches

In researching my purchase of an inexpensive TV console, the most common complaints I read of were of items damaged in transit and of materials that were incorrectly made in the factory (pre-drilled holes not lining up correctly, missing screws, etc).

I am happy to say that my Techcraft CRE48B console had neither of these problems. It was delivered in a box that was sturdy, with exterior corner protection, and everything inside it was very well packed and protected by Styrofoam and sheets of plastic.

The exterior pieces are quite heavy and have a beautiful glossy smooth black finish which is flawless. The interior pieces are made of a lighter but sturdy particle board painted a mat black. The glass is tempered and clear and was fit perfectly in the doors. The back cover is very sturdy compressed cardboard with large openings for all the cords to fit though, and attaches with screws, not nails. I should note there is a fifth leg which projects from the middle near the back of the unit which is not visible in the product image.

It took me about 2 hours to put it together by myself, working very carefully. There were no missing pieces (and no extra pieces). The instructions are mostly images only, but all the larger pieces are labeled with stickers and the smaller pieces are represented with 1:1 scale drawings. I had no difficulty understanding the directions. Assembly requires a Phillips screwdriver (smaller and larger heads). Everything fit together just right and when complete it feels very solid.

Overall I am very pleased with this item, I consider it to be a very good value. The only issue I have with it is that even after adjustment, one door is just a tiny bit off level, but that's a flaw I'm willing to accept in an item in this price range.

Buy TechCraft CRE60B 60-Inch Wide Flat Panel TV Credenza - Black Now

Great unit. For anyone wondering their center speaker and components will fit into this unit, here are the dimensions:

cabinet top:

59-7/8"W x 19-3/4" D

weight capacity: 200 lbs.

center compartment:

available space: 13-3/8"W x 17-1/4"D

weight capacity: 33 lbs.

adjustable shelf: 19-1/4"W x 15-3/4"D

door with cloth panel for center channel speaker

right and left compartments (each):

adjustable shelf:

19-1/4"W x 15-3/4"D

weight capacity: 33 lbs.

bottom shelf:

19-1/4"W x 15-3/4"D

weight capacity: 33 lbs.

tempered glass doors

Read Best Reviews of TechCraft CRE60B 60-Inch Wide Flat Panel TV Credenza - Black Here

They do a great job mixing quality wood that's visible and low quality wood (to keep costs down) in all parts that aren't visible.

This stands looks really nice but it isn't very practical. The mesh center cabinet meant for your center speaker is far too small to fit the majority of center channel speakers. The side cabinets aren't wide enough to fit the larger receivers.

This is still a quality sturdy stand but make sure if you need it to hold your components that it will fit them properly.

Want TechCraft CRE60B 60-Inch Wide Flat Panel TV Credenza - Black Discount?

I bought the Techcraft Cre48B AV stand to sit under my new wall-mounted Samsung LN52A650 LCD TV to hold my home theater equipment and I will say it looks absolutely great doing that. I did have the TV on the stand for a few days as I waited for my TV mounting bracket to arrive from Amazon and it seemed to hold the additional weight without any problem. Delivery was quick for such a big item, five days from ordering to delivery. I held my breath taking all of the pieces out of the box since I have heard nightmare stories about shipping casualties with furniture items. Once I removed the glass door panels and they were intact, I breathed a sigh of relief and started the task of assembling the stand. It is a little intimidating at first, like any furniture of this nature. But once you get a feel for it, it moves right along. The directions call for a Phillips head screwdriver and hammer, but I didn't find a need for the hammer at all. The stand uses a series of cam locks and posts to tighten the panels together. This is where I have to deduct a star from an otherwise good product. The posts screw into predrilled pilot holes. No problem until I reach one particular pilot hole which is drilled far to large to allow the post to be screwed in. You can't just move the post and screw it in elsewhere, because the corresponding cam requires it to be lined up perfectly. This particular cam/post was vitally important since it held the side panel in place. So essentially I was in a bind due to poor craftmanship. If it had been a store purchase, I would have returned it for a replacement. but being mail order and being a very heavy item to boot, I decided to improvise and glued the post in with epoxy and waited until the next day to complete the stand. The epoxy worked well and assembly went smoothly after that. Overall, not counting the misdrilled hole fiasco, it took me about an hour and fifteen minutes to complete. My one other complaint is that they could have included one or two extra cams since they are easy to strip, so be careful with them. Overall, I would buy the product again, but Techcraft may want to assess their quality control when issues like mine are happening.

Save 30% Off

Just received this stand and put it together this week. I've been on the lookout for a great stand at a great price for a few months now and finally settled on this one after exhaustive researching. The price dropped to $265 + Free shipping and I just couldn't pass that up!

First things first, this baby weights A LOT! I still can't believe they shipped it for free. I was a little intimidated after opening the box and seeing all the parts. But after taking a deep breath, laying everything out nicely and browsing the instructions briefly it wasn't bad at all and everything made sense. I almost had a heart attack when I thought one of the support feet were missing but a quick check back into the box with tons of wrapping and foam to keep the parts safe and I found it. I didn't time myself but I'm thinking maybe a good 60 to 90 minutes putting this one together is about right. I love the color and finish on this. While it is black it almost has a dark brown feel about the color which is perfect for my setup. While some have made mention of the center area which isn't big enough for a normal/standard center channel it wasn't a problem for me. Even though mine would easily fit as I have the Sony HTIS-100 I chose to set it on top anyways. The two storage areas on either side aren't huge but they have adjustable shelves and are the right size for standard components and with the windows you shouldn't have any problems with the remotes. I'm at a point now where I don't feel the need to display all my components and would rather focus on the TV itself and this stand is perfect for that. It also sits at just the right height to accentuate viewing of my 52" Sony XBR9 whereas my last stand sat rather low. This one is perfect.

Overall I'm very impressed with this item. Great quality construction, fairly easy to put together, great price and incredibly good looks you really can't go wrong. I also liked that with the doors you have the capability to mount them on either side for opening depending on your setup. A real nice touch for flexibility. Overall I'm VERY happy with this product and would highly recommend it to anyone with a 42 to 55" TV. Thanks!