I'm returning the product because I think this is a cheap trick to get you to buy the expensive accessories.
In the old days, we'd call this low-balling.
Buy John Louis Home Deluxe Stand Alone Tower Now
The organizer is relatively easy to put up but the picture makes you think there are many more shelves for this unit. In fact there were none that came with it. I had to order extra shelves to the tune of $50 per 2 shelves for the unit. It is still not a bad deal compared to california closets or other all wood closet organizers.Read Best Reviews of John Louis Home Deluxe Stand Alone Tower Here
If you have a John Louis system you are already familiar with the tower unit. This is just a standalone unit that you can add for more storage space. It is made of the same materials as the closet system and goes together similarly. One thing to be aware of, it does not come with any adjustable shelves! Depending on your usage, you will probably want 2-4 shelves, so you'll need to factor that into the tower's cost. It comes with the four "walls" sides, top, and bottom, and mounting hardware. So what you have when you are done is an empty tower ready to add shelves, drawers, etc. to.Want John Louis Home Deluxe Stand Alone Tower Discount?
I ordered this along with the closet organizer system from John Louis to use as a shoe rack for my wife. I was a little annoyed that it does not come with any shelf inserts, they are sold separately, which makes the cost of the tower enclosure on it's own seem overpriced. But at the same time it does make sense b/c there are several custom options you can choose with this enclosure (all shelves, or combination of shelves and drawers, doors, etc)My biggest issue was the installation. The instructions have you measure, mark out, and place the wall brackets for the sides which need to be precisely correct so the shelves will fit (too close and shelves won't go in, too far and shelves will fall to the floor). The problem I had was with the included dry wall anchors which are difficult to stay on center when screwing them into the wall. I ended up with a slightly too wide initial placement(about 1/4-3/8in) of spacing making my shelves prone to slipping out of the groves. I had to pull it down, patch the wall holes and start over again the next day. On day two, instead of measuring the placements of the wall brackets, I installed the two top hanging brackets, then assembled the whole unit (sans shelves) and hung it on the wall, then I just marked the location of the side brackets and was much faster than dealing with drawing plum lines etc. To deal with the drywall anchor issue, I found a piece of PVC pipe found around the house which I used as a guide to keep them on center and not wobble while screwing into the wall.
No comments:
Post a Comment