I bought this rack to hold my clothes during a move from one state to another. Included in this purchase was the advertised canvas cover.The rack is made of sturdy materials and survived the trip in a UHaul truck without incident. It rolls fine when loaded to the gills and the bottom rack was useful for shoes.
With the cover on, the top rack is pretty much useless for storage because the cover slides down and rest on that rack. Any items you want to store on top would be resting on the cover itself.
One thing to be aware of: The rack is held together only by friction and gravity. The two racks slip over the four poles and are held in place only by their weight; no screws or bolts secure them.
This means that the unit cannot be lifted by the racks, otherwise, the entire thing falls apart. They can be safely lifted by the poles and this will keep everything together. While this design sounds flimsy, it really is pretty strong once assembled correctly.
The only reason I did not give this item 5 stars was because of the poorly written instructions. As usual, these were written by blind individuals who speak no known language. Consequently, you are left to figure out how the parts assemble correctly. Even a simple thing such as which way the racks fit; with their edges up or down? The picture certainly doesn't make that clear. This is crucial because the corner tubes of the rack are tapered slightly (not obvious at first glance) which locks the unit together.
REMEMBER THIS: the plastic inserts that fit into the four corners of the racks are also tapered tubes; their sides are NOT parallel. It is this taper that allows the racks to compress against the four poles and lock the pieces in place. This important fact was overlooked in my set of instructions, but is perhaps the most important point to understand.
The cover, also well made but with one major cost-cutting flaw. It uses buttons to secure the front opening instead of a zipper. Consequently, it's not dust proof since it hangs open between the widely spaced buttons.
A few notes that may save others' time:
1. It definitely takes two people to put this rack together.
2. Instructions are somewhat lacking with respect to the plastic fasteners: they fail to point out that on each fastener there is a "top". Once you realize that the top is slightly wider than the bottom two pieces, the work goes smoothly.
Because the instructions were not clear I had to call customer service which turned out to be a most helpful and painless experience!
Buy Whitmor 6058-90 Supreme Garment Rack, Chrome Now
ROLLING SUPREME GARMENT RACK WITH TOP SHELF Very pleased with this garment rack. Delivery was quick. It takes a about 20 minutes to put together and is very sturdy. Bottom shelf can be set to desired height.Read Best Reviews of Whitmor 6058-90 Supreme Garment Rack, Chrome Here
This rack is easy to assemble and very sturdy. I thought I might have to put an X support on the ends, but it's fine without it. I'm using it for photography costumes and props. It holds a LOT! Be sure to get the cover too. It helps to keep things clean.Want Whitmor 6058-90 Supreme Garment Rack, Chrome Discount?
I have a few smaller Whitmor chrome racks in the basement that have held up and served their purpose well so when I purchased the garment rack I knew that I could trust the name. If you feel that this rack is a bit expensive, I'd say that the extra price is justified. They seem to make quality products.The rack is about 3 feet wide and just under 6 feet tall. The two shelves appear to support a good deal of weight I've put 50 pounds on each without seeing much bowing. It does wobble a bit when pushed but it's nothing I'm concerned about. When filled with clothes it's sturdy and rolls well.
If you're putting this together yourself, it will be a bit tricky. The poles are just under 6 feet tall and you've got to somehow balance all four of them while sliding the shelves down each one if you follow the provided directions. I discovered a couple things while assembling it that might help if you're going to attempt it yourself:
1. Keep in mind (I didn't realize this and the directions were a bit foggy) that the black plastic clips that attach to the 4 poles have to go on in a certain direction. Each clip is labeled with a "TOP" to aim towards the sky. That will make sliding the shelves on them less of a struggle.
2. Likewise, the shelves themselves also have a top and bottom, something the directions also didn't make clear. The lip of the shelf must face DOWN for the shelf to slide on to the clips the best. I figured the lip went up, and found myself wanting to hammer the shelf on to the clips. Flipping the shelf around and sliding it on to the clips with the lip down made life much easier.
3. Each pole is two pieces that are screwed together in step one to make four long poles. Putting this together myself, I found that skipping this step and putting the bottom shelf on the smaller four poles and THEN creating the longer poles by screwing them together made assembly much easier for one person.
Overall this is a great solution for overflow from any closet.
Save 25% Off
No comments:
Post a Comment