Monday, September 8, 2014
Arbora Teak Wood Outdoor Serving Cart
Thursday, June 12, 2014
Electronic Closet Tie Rack By Necktie Accessoriesj In Plastic
Bottomline, it fits, doesn't fall off, is stable, fast, and has a large capacity. AND the light is bright....
Way better than any junk you'd find at a men's store or bed bath and beyond type store. This is the best revolving tie rack I have ever owned. I am a tie connoisseur and have over 1,000 ties. I have 7 different models of revolving tie racks in my closet and this model is the quietest, and best constructed of the lot. I read another review that said you had to remove the rod in your closet to install this rack? That's just not the case with this rack, you simply remove the slide and lock piece on the top of the device, then replace it on the other side of the closet bar. Very Simple. You will be very pleased!
Buy Electronic Closet Tie Rack By Necktie Accessoriesj In Plastic Now
Just recently purchased, this is my third electronic tie rack. This one holds the most ties, is the most quiet, and fast. I hope it lasts, it seems to be more sturdy than the others I have had. Please note, you do not have to remove the closet pole to install, just remove the clip place over and under pole and screw clip and rack together.Read Best Reviews of Electronic Closet Tie Rack By Necktie Accessoriesj In Plastic Here
First of all the customer service received was very prompt, courteous, and responsive. That was much appreciated. Highly recommend the store.Purchased one and it is currently working very smoothly.
It is true that you need a closet rod for this product to work, it is true that the product is somewhat flimsy and cheap plastic feel, it is also true that the product does not make much noise and when it works it works well and the light on it is helpful.
When I first opened the product I was a bit taken aback by how toy-ish the item felt and the initial installation was not successful as the internal flimsy plastic receptacle for the tightening screw was broken (you could hear it rolling around inside) and hence the unit could not be secured on the closet rod, however, the motor operated without making much noise and the speed of rotation was comfortable enough to allow one to view the collection of ties as they go around (note: you really do need to have a good number of ties 2 dozen or more as this unit can hold 60 or so to make good use of this).
With the defective product I contacted the seller and received a very timely response and apology. Paid $3.95 to have product exchanged out (did not have to pay to send product back) and the replacement arrived in two or three days. This unit installed without a hitch, well a teeny tiny hitch (had to tug on the belt ever so slightly to get it to start rotating) and currently operates nicely.
Things to be careful about: a) be gentle when installing it as it is made of flimsy plastic and a fall or too much force could easily crack the plastic b) make sure you balance the weight of ties on either end of tie rack for optimum functioning.
Yes, this product is a delicate toy and should be treated as such. I would be willing to pay more if I could find the exact same thing but made with wood or metal alloy or something sturdier it would be classier and perhaps more durable.
I did search the web for a much higher quality one but had no luck, even the wood looking ones are made of plastic.
For now I don't have to go through the neck tie hanger to sort through the collection of ties one by one; they just rotate round and round before my very eyes! It is a product that provides an economical and reasonable solution.
Want Electronic Closet Tie Rack By Necktie Accessoriesj In Plastic Discount?
This tie rack seems to work very well. It was easy to put the batteries in and also easy to put on the clothes pole. The speed is fast almost too fast, but all in all, so far, this seems to be a very good tie rack. My husband is happy with it.Tuesday, February 4, 2014
12" Locker Shelf-The Ultimate Solution in Locker Shelving
Buy 12" Locker Shelf-The Ultimate Solution in Locker Shelving Now
After purchasing several different locker shelves only to find that a) they were the wrong size or b) they didn't stack well, I finally broke down and bought the Locker Shelf in the Ultimate Organizer which has the option of fitting in a 9", 12", or 15" locker. This is a great system that allows my daughter to customize her locker to fit her current needs. It is very sturdy and fits beautifully. It will last my daughter all the way through high school!Read Best Reviews of 12" Locker Shelf-The Ultimate Solution in Locker Shelving Here
Easy to assemble. Fits perfectly inside my standard locker. Helps to organize the stuff that lives in my locker at work. Organized shoes and shampoos and towels nicely.Want 12" Locker Shelf-The Ultimate Solution in Locker Shelving Discount?
This locker shelf is solid and fits well. With one additional shelf it would be perfect. I added a piece of plywood to create a 3rd shelf as the slot is already there.Thursday, January 2, 2014
WOSBR1O
The size and shape of the top was an exact fit for the base on my LG 55LM8600.
I have Polk CS-10 center speaker that fits nicely beteen the legs. So, except for the price, all pluses from me. Wanted to lift HDTV higher since sound bar was blocking 3D transmitter, it's the perfect solution to our needs. Smartly configured to fit sound bar and allows easy cable access.
Sunday, December 8, 2013
Alera Steel Bookcase
The two-piece back should be one solid panel or at least been packed as a hinged, folding panel to be more rigid. The shelves should be secured to the back panels somehow, and they aren't. Installing the top panel on one side kept causing the side panel to slide out of alignment along the entire height of the bookcase. This is due to the tight fit and tab/hole side-back joint design. The side panel slid enough to cause the tabs and holes to separate, and this wasn't easy to correct. Buyers would be best to assemble this on a hard surface instead of carpet. If assembling on carpet, lay the bookcase down, push the bottom flush against a baseboard, and then use the mallet to insert the top. This will help keep the side panels from sliding and separating from the back.The all-steel bookcase looks nice enough. For something so large and with the potential of holding a great deal, the flat-pack design with assembly and no hardware shouldn't have been selected in my opinion. Although when assembled, the bookcase is not as sturdy as I'd like, it probably is fine. Relatively speaking, I seem to have gotten the bookcase for a steal at $196.18 shipped given the total cost through other merchants. I would not likely buy this again and would instead look for fully-assembled and more rigid options.
The two-piece back should be one solid panel or at least been packed as a hinged, folding panel to be more rigid. The shelves should be secured to the back panels somehow, and they aren't. Installing the top panel on one side kept causing the side panel to slide out of alignment along the entire height of the bookcase. This is due to the tight fit and tab/hole side-back joint design. The side panel slid enough to cause the tabs and holes to separate, and this wasn't easy to correct. Buyers would be best to assemble this on a hard surface instead of carpet. If assembling on carpet, lay the bookcase down, push the bottom flush against a baseboard, and then use the mallet to insert the top. This will help keep the side panels from sliding and separating from the back. The all-steel bookcase looks nice enough. For something so large and with the potential of holding a great deal, the flat-pack design with assembly and no hardware shouldn't have been selected in my opinion. Although when assembled, the bookcase is not as sturdy as I'd like, it probably is fine. Relatively speaking, I seem to have gotten the bookcase for a steal at $196.18 shipped given the total cost through other merchants. I would not likely buy this again and would instead look for fully-assembled and more rigid options.
The two-piece back should be one solid panel or at least been packed as a hinged, folding panel to be more rigid. The shelves should be secured to the back panels somehow, and they aren't. Installing the top panel on one side kept causing the side panel to slide out of alignment along the entire height of the bookcase. This is due to the tight fit and tab/hole side-back joint design. The side panel slid enough to cause the tabs and holes to separate, and this wasn't easy to correct. Buyers would be best to assemble this on a hard surface instead of carpet. If assembling on carpet, lay the bookcase down, push the bottom flush against a baseboard, and then use the mallet to insert the top. This will help keep the side panels from sliding and separating from the back.
Tuesday, October 8, 2013
Ennospace 18 Inch x 8 Inch x 1.25 Inch Oliver Wall Shelf Display Floating Shelves White
Buy Ennospace 18 Inch x 8 Inch x 1.25 Inch Oliver Wall Shelf Display Floating Shelves White Now
the shelve was too small. I can hardly put stuff on it. for the price I thought it would be larger!Monday, September 9, 2013
Cherry Finish 6 Shelf Bookcase
Buy Cherry Finish 6 Shelf Bookcase Now
Incredibly disappointed. Product supposedly marked down from $300, but I have bought better bookcases for much less. I at least expected for this price and based on the products picture, that the back of the bookcase was wood, not just thin plastic veneer. Plus the fact that the assembly directions are not great, leaves a bad taste in my mouth. Future buyers beware! My worst purchase onlineRead Best Reviews of Cherry Finish 6 Shelf Bookcase Here
There is no way that this bookcase's original price was $402.56. It's not even real wood; it's that "pressed board" thing. Sometimes on amazon you really do find impossible-to-believe deals, but in this case, you get what you pay for. The item's value is misrepresented.It took me 4 1/2 hours to assemble it. I am a single woman who has assembled only a bench -which required only an allen wrench (provided!) -and a console table. I have no tools other than a four-way screwdriver. I think that it could be assembled in about 80 or 90 or 100 minutes by a man who has assembled furniture before and who has a decent tool collection. Assembly instructions, although in diagrams only, are fairly clear.
Now that it is assembled and in place, I will say that it looks nice enough. For a graduate student's apartment. I have yet to unpack my boxes full of books and test the strength of the shelves, though. I think and I hope that they will prove sturdy enough.
In truth, I enjoyed spending the 4 1/2 hours putting this thing together, because I learned that I can do it! I can assemble furniture by myself.
Finally, there were no items missing. Everything that was supposed to be included was included. And again, I did it with nothing but a 4-way screwdriver.
Want Cherry Finish 6 Shelf Bookcase Discount?
I purchased this unit because it was the most affordable 24" wide unit I could find. I needed the 24" width due to space limitations and I wanted something that wasn't just plain black. This fit the bill. It is fairly simple to put together, after all, it is just a bookcase. I think the hardest part was dealing with the two piece back panel. I was wondering why they couldn't just make it one piece with a fold down the middle. Other units I have purchased in the past did it this way. It would eliminate the fussiness of having to assemble the center plastic strip which is annoying but, not insurmountable.I bought it to hold several years worth of magazines in one locatation. The only drawback is that when I adjust the moveable shelves to the height that works for the space below then the space above the shelf isn't quite tall enough to stand the magazines up on end so they will have to lay flat on those shelves. Not ideal but, it still works. Otherwise, it is a decent shelf that was shipped very quickly and arrived in excellent shape. It was double boxed to avoid shipping damage. This turned out to be a very good idea as the unit is pretty heavy and the outer box showed signs of being manhandled during shipping. I am sure it was due to the size and weight and those package guys have to move pretty quickly to meet their schedules. The communication from the shipper was excellent and the whole transaction went well. I would buy from this seller again if I need another item they carry.
Friday, August 2, 2013
Commercial Chrome Steel Wire Shelves NSF Shelving 48"L x 18"W x 72"H
I would have given this 5 stars if it had not been for the shipping.
The shelves are really super! Went together smoothly and they are beautiful and sturdy. Love them!! We put them in our new kitchen pantry area as a 'chef's rack' where we got 'S' hooks and hung our pots and have our large holiday platters on the shelves.. Great!
We received our steel shelves on time; however, the packaging was horrible. I'm surprised any of the hardware pieces didn't fall out. It appeared this was taken off of a shelf like at Wal-Mart and shipped -rather than packing into another suitable shipping box. With the weight of this item, it clearly needed more substantial packing material. Both ends were ripped off and you could see almost the entire contents from both ends. Really careless and poor decision making on someone's part and should be corrected.
Although the shelves themselves weren't harmed, I believe we received them just in time before any real damage or loss of contents happened.These wire shelves are truly heavy duty. Two of the shelves were damaged from shipping. I contacted the company and they had me forward my receipt from Amazon.com and then attach photos of the damage. The two shelves were shipped out pretty quickly. Works great now. The shelf support system is a bit tricky to get right though it's just plastic but seems to work well enough.
Buy Commercial Chrome Steel Wire Shelves NSF Shelving 48"L x 18"W x 72"H Now
I purchased several shelving units for my garage. I LOVED the fact they were delivered right to my door. Don't know how I would have gotten them from store to car to garage otherwise (single older woman, yada yada). They work best to have two people for assembling. They are so sturdy I loaded each up with heavy boxes. These have wheels with breaks that work very well. Don't know that I plan to wheel them around a lot but this is great for when it is needed. Only reason I don't give these a 5 star is because once you set the shelf height it isn't easy to change.Read Best Reviews of Commercial Chrome Steel Wire Shelves NSF Shelving 48"L x 18"W x 72"H Here
I just spent about 30 minutes assembled this. Very simple to put together, just large. I assembled it on floor, then used two people to lift to standing position. The product itself seems fine. Although the packaging was completely torn open on both ends. One of the shelves was bent like an elephant had sat on it. I contacted Seville and they will replace the shelf at no cost. Just annoying to spend $150 and receive a damaged product. This one looked like it had already been assembled and returned to the store. Seems this is common.Want Commercial Chrome Steel Wire Shelves NSF Shelving 48"L x 18"W x 72"H Discount?
When was the last time something you bought was a bargain? Well, this could be the next. The quality of material and manufacture is here. The versatile design is here. The ease of assembly is here.All of the parts for the different assembly options are here, including some SPARES (just in case you damage or lose one).
It even comes complete with the shelf liners.
All this, and FREE SHIPPING.
NOTE: Mine arrived with a number of black plastic discs and scraps lose in the box. I thought these were damaged parts, but they were just scraps. CAUTION: They can plug up the holes in the shelving that the poles go through. Just knock them out.
TIP: You're instructed to assemble the two sections of pole first. I found it easier to assemble the bottom half completely, then added the top sections of the poles and upper shelving.

