Creative Connectors Invisible Mount Corner Wooden Shelving

I ordered the 22-Inch shelf. Unfortunately, the product description didn't explain what the 22 inch measurement was for. I incorrectly assumed it was a diagonal measurement of the shelf. It is, in fact, the measurement of each side of the shelf touching the wall. This shelf is huge. So, I will be returning it for the 16 inch. I wish the product description would have been more clear. Oh I also noticed there are about 6 small and uniform holes drilled on the surface of the shelf. I do not know what those holes are for and would rather they were not there.

This is an attractive shelf that was really easy to install. I liked the walnut finish and I put a heavy lamp on the shelf and it holds it without a problem. Overall, it's a great shelf that holds a lot of weight, is easy to install and looks nice. Highly recommended!

Buy Creative Connectors Invisible Mount Corner Wooden Shelving Now

I bought two of these shelves, different sizes, to put in the corner of my small laundry room to store laundry supplies. The description said it would hold quite a bit of weight, which is what I wanted. When I got them it seemed unlikely that the two little strips of wood used to hold the shelf would do that. But it does. Like I said, so farso good. I have only had them a couple of weeks, but they seem very sturdy. I have two large (170oz) containers of liquid laundry detergent on the lower one (16") plus two smaller bottles of other laundry cleaners. I placed it at a height so I could use it to dispense the detergent. The upper one (12") I use for an iron. They look very nice in the corner and I have gotten compliments on them. The only thing I would recommend is to try and put the screws in a stud, if you can. I could not do that and would feel more confident if I wasn't relying on the screws in drywall (with anchors included). Overall, I am very pleased with the quality and look of these shelves.

Read Best Reviews of Creative Connectors Invisible Mount Corner Wooden Shelving Here

I bought this shelf along with one size larger and a 22" size for my son's nursery. This shelf is large enough to fit a photo book, a piggy bank (average sized) and a small stuffed animal. The color is a deep chocolately brown (what I would describe as "Espresso"). The shelves were just as easy to install as the description claims which surprised me!. Use a level and preferably a second set of hands and you'll be all set! They really do look like they are floating in the corner of the room. My only complaint is that just installing them caused a few knicks and scratches. nothing all that noticeable and if I had installed them with someone else I may have been able to avoid causing them but nonetheless, they are not solid hardwood so be careful! Overall, very pleased!

Want Creative Connectors Invisible Mount Corner Wooden Shelving Discount?

It is a nice product at a good price. A note to the wise. Make sure your walls are square. If they are not square the shelf will not work as designed. I needed to make my own shelf supports. If your walls are square the shelf should work fine. I am still satisfied with the product.

Save 13% Off

Prepac Four Sided Media Storage Spinner-1060cds

This media stand has incredible storage capacity without hogging an entire wall of your room. It's a quality product, made of sturdy wood that I'm confident will have no issues supporting a media collection, books, or any other odds and ends you may choose to put on the shelves.

It takes up about as much space as a 5-foot-tall person would if you put a box around them and is suprisingly easy to assemble: there are a total of 12 pieces, not including screws, and all you need is a philips screwdriver and a hammer (hammer use is minimal, and mindless). Once it's assembled, it's relatively easy to lift (the boxes it comes in are HEAVY one is 70 lbs; the second is smaller, but awkward to lift). The pieces are nicely labeled as being part of Box A or Box B, and are so easy to identify that there's no risk that you'll mistake one component for another.

As someone else mentioned, be ready to spend some time cleaning off the sawdust that coats the packaging it took me more time to clean off the assembled unit and shelves than it did to put it together.

Storage capacity (MAX):

26 CDs per shelf; max of 10 shelves per side (so if you wanted to fill all 4 sides with CDs, you could fit 26 x 10 x 4 = 1,040 CDs)

18 DVDs per shelf; max of 7 shelves per side (so if you wanted to fill all 4 sides with DVDs, you could fit 18 x 7 x 4 = 504 DVDs)

22 Blu-rays per shelf; max of 8 shelves per side (so if you wanted to fill all 4 sides with Blu-rays, you could fit 22 x 8 x 4 = 704 Blu-rays)

Note: The above numbers assume that you're using basic CDs, DVDs, and Blu-rays (no box sets, etc.). Keep this in mind when figuring out whether or not this will be large enough to hold you current (and future) collection.

Or, you can be like me and mix and match the above. I also have every intention of buying a second one of these to store my library of paper-back books :)

*UPDATE*

I did end up purchasing not just one, but two more of these units. They're fantastic at supporting books of all sizes, though the mass media paperbacks are definitely the most aesthetically pleasing fit: they end up inset about an inch from the edge of the shelves, so factor in the depth of the book when deciding whether or not you're comfortable with the "look" of books extending past the depth of the unit.

For quantities (based on your typical 200-300 page mass-market paperpack):

~10 Books per shelf; max of 7 shelves per side (so if you wanted to fill all 4 sides with mass-market paperback books, you could fit 10 x 7 x 4 = 280 Books)

I'm personally alright with the "look" of the larger books on the shelves and can happily confirm that the shelves easily support my college text books (including the huge accounting and tax reference books I've accumulated).

I will warn that when you're filling these units with whatever media/books/items you choose, be careful to distribute the weight evenly (e.g. fill opposite sides at the same time; make sure that you distribute the weight across the top and bottom of the shelves). The reason isn't that the unit won't support the weight, but when you go to turn it on the lazy susan, there's a risk that it can tip over if you only fill one side (or especially two adjacent sides) while leaving the rest of the unit empty.

I was somewhat apprehensive before puying this product, because I wasn't sure how difficult it would be to assemble it. Although the boxes were very heavy, the assembly job turned out to be very manageable. Instructions were good and I was able to complete the whole assembly job within 45 minutes, with very minor help from my wife.

What I like about this CD-rack is that it allows for very dense CD storage about 1000 CDs in a footprint of 18"x18". It also looks like furniture and blends in well with other furniture.

If you have a lot of CDs, DVDs and Videotapes languishing in various places, I'd highly recommend it.

Buy Prepac Four Sided Media Storage Spinner-1060cds Now

Awesome product. I have almost 400 dvds in my collection and i still have lots og room for more. Withthe extra room, I am storing old VHS Tapes and Video games. Its very convenient because it is so small in width and it rotates, so you can holddvds on eachside. It isvey tall though, about 65 inches. Thats not a problemnless your a pygmy though. Definitely reccomend.

Read Best Reviews of Prepac Four Sided Media Storage Spinner-1060cds Here

Once you get past the hurdle of assembling this four-sided spinning tower, you'll be very glad you bought this product. It is relatively attractive compared to other media storage racks for sale and it does spin rather well even when loaded to capacity. I am amazed at how little space it actually takes up in order to hold so much media.

Moreover, the shelves are adjustable so you can choose to use this to store just CDs, just DVDs, just VHS tapes or whatever. You can also adjust the shelves so that part of the tower stores one type of media while the other sections store other types of media.

If you are not mechanically inclined I recommend you get a friend or even a handyman to help you. I had a handyman help me because I am "all thumbs." SMILE He made faster progress after I suggested that we stop reading the cryptic directions and just follow our instincts about how it should be assembled. The directions are rather vague.

The shipping charges are high (about 70 dollars for UPS Ground when I bought it on Amazon) and it is heavy but it's still worth it. In order to hold over a thousand CDs or many, many DVDs you need a very large storage rack or tower. That results in higher shipping charges and a heavier storage rack. Nevertheless, it's a miracle the manufacturers could design it to take so little space!

The instructions are vague and therefore I can only give this product four stars. The manufacturer needs to write clear directions so that anyone can assemble this tower.

Overall, I recommend this four-sided spinning tower as a great way to store media including CDs, DVDs, VHS tapes and more. It costs a little more with the shipping charge but it's worth it. It does look like furniture and this is a must for those of us who have large collections of CDs, DVDs and/or VHS tapes.

Want Prepac Four Sided Media Storage Spinner-1060cds Discount?

I was preparing to purchase a wall CD storage unit when I came across this revolving one. I feel very fortunate that I did so because the wall unit I was about to purchase took up about 6-7 feet of wall space for about 1000 CD's. By contrast, this unit makes CONSIDERABLY more efficient use of available space, occupying only 18 inches of wall space but with only a slightly deeper footprint than the wall unit.

The unit is very attractive, with an appearance of real wood even though it is made of composite particle board. Some may have a problem with the fact that it is particle board but as long as you know both its advantages and disadvantages, it can provide a durable, long lasting, efficient and attractive storage. I have particle board bookcases which have lasted decades without problems.

First of all, the PROS of particle board are:

Attractive Real Wood Appearance

Durable and Long Lasting if Used Properly

Cost Effective Much Less Expensive Than Real Wood

Can Be Disassembled and Easily Packaged in Smaller Units For Shipping Compared to Real Wood Which Usually Cannot Be.

CONS are:

Usually is Extremely Heavy, Much More So Than Wood. For This Reason it is Often Difficult if Not Impossible to Move Once Assembled.

Particle Board Materials Can Be Easily Damaged if Not Handled Properly. Screws Which Anchor in the Wood Can Easily be Pulled Free if Wrong Type of Pressure is Applied.

The unit is shipped in two boxes, with the longer side panels in one box and the shorter shelves, base unit, tops/bottoms and hardware are shipped in a smaller box. Each box is QUITE heavy and the longer box really requires two people to handle it properly if you need to move it some distance.

The storage unit itself requires assembly so if you are not handy with tools or don't like assembling items such as this, it may not be the unit for you (unless you have access to someone who can do it for you). Furthermore, even once you remove all of the components from the boxes, it really works best to have two people (or even more) assist in assembling the item due to its weight and unusual shape.

I was able to assemble it in about 2 hours by myself and I consider myself handy with tools. The assembly was problematic however because I found the instructions to be quite inadequate. As a result, I ended up with some damage to the unit. Fortunately, I was able to repair most of it by drilling some additional holes and the unit was left with only some minor cosmetic damage.

The instructions have 12 steps however the instructions for the most important step (Step 11) were COMPLETELY OMITTED in my sheet, due to an obvious printing error. The unit is assembled upside down to permit the assembly of the turntable base (which ends up on top). Once the sides and the base are assembled, the unit must be rotated (flipped) 180 degrees so that the base ends up on the bottom. This is the most important part of the assembly and unfortunately, step 11 of the instructions which tells how to do it is missing. The steps go from 1-10 then to step 12!

One of the biggest problems with particle board, as I mentioned earlier is that screw anchors can easily be pulled from their seat in the composite (particle) material if too much of a "pulling" force is exerted on them. Rotating ("flipping") the unit so that the top becomes the bottom can easily create exactly this wrong type of force on the screw anchors (particularly since there are only one per panel joint) and in my case, pulled some of them out of the particle board. If this damage cannot be repaired (as is often the case with particle board) you can be left with a compromised or even unusable unit.

Fortunately, I was able to repair most of my damage by drilling new holes in the sides, which created NEW screw anchors. This left me with only one shelf that I wasn't able to place exactly where I wanted it to be, not a major problem at all. The remaining damage was minor cosmetic damage.

The missing step, step 11 of the instructions is the one which addressed how to make that "flip" of the unit and presumably explained how to do it without damaging the unit. This is also the step that it is advisable to have at least two people available to perform. I finally figured out that the "flip" can be completed safely by CAREFULLY laying the unit on its side, adding the top at that point to complete the assembly process then CAREFULLY finish the flip.

The turntable assembly which allows the unit to rotate is another key weakness in the product in my opinion. It is hard plastic (instead of metal) which seems to me will be easier to break. Since this is the main load bearing component of the unit, it is going to get a lot of stress. I have a concern that after a few years of usage, that plastic turntable is likely to break from the load it will be regularly receiving. It could surprise me however and last quite a while without incident. Still, I am contacting the manufacturer to get a spare turntable to have on hand in the event the main one does break.

One last comment about the quality of the unit is that when assembling each side panel, there is only ONE 2 inch screw per panel! I think this is totally inadequate. These panels are 5' or so long and having only one screw securing them to each other is simply not sufficient in my opinion. It seems as if the manufacturer wanted to get away with the bare minimum of assembly hardware.

Having only one screw per panel means that the unit can be easily damaged during the assembly process (this causes the side panels to flop around easily until they are better secured by adding the base and eventually the top). Adding the base and top does add some rigidity to the unit however, and apparently the manufacturer considers this to be adequate for the life of the product.

It may in fact very well be but I prefer to have the side panels secured better. Fortunately this can be easily done by getting some more 2" screws from the hardware, drilling some additional holes in the side panels where they butt against each other and adding the extra screws. Adding two more screws per panel (one halfway between the center screw and the top and the other, half way between the center screw and the bottom) will give you a more secure structure (3 screws per panel now) and you can add even more if you wish. I am going to go ahead and add 2 per panel to mine after the fact. Not only will this provide a more secure overall structure, the additional anchor points should also lessen the possibility of the side panels warping over time.

One last point is that particle board shelves (30" to 36" or longer) tend to "sag" if being used with a load on them for an extended number of years. This sag can often be corrected in most cases by simply "flipping" the shelf so that the sag now becomes an upward "bow" and which over time should return the shelf to a normal, flat shelf again. The individual shelves in this unit are much shorter, only about 11" so they shouldn't experience any "sag" problems over time.

I have subtracted 1 star from my overall review for the deficiencies which I have already noted, i.e. the lack of sufficient screw anchor points on the side panels, the inadequacy of the instructions and the plastic turntable (instead of metal). Were it not for these 3 areas which I consider weak, I would have given the product 5 stars. Even at that, I like the design of the unit so much that I have purchased a second one, which sits right next to my first one. The second one was much easier to assemble (and I was able to do it without ANY of the damage I had incurred damage while assembling the first one) since by then I had the experience of having assembled the first one. Mine are both the "Expresso" finish and they look great!

Save 25% Off

Furinno 99132EX/BK 5-Tier Corner Square Rack Display Shelf, Dark Espresso

For the price, its sturdier than I thought. Shelves are nice height for notebook binders. Easy to assemble as long as you don't follow the directions. Step one was to install the feet into the first shelf, then turn the shelf over. When you do, the feet fall off. Once the first set of riser are in, the feet stay put.

Also when assembling, make sure all the seams on the shelves are on the same side (facing the wall).

I really can't say anything bad about this little shelving display. I ordered it to serve as a sort of bedside table and it's performed beautifully thus far. The assembly was a breeze and the maintenance on it is easy wipe down with a dry cloth to keep the dust away and occasionally run a damp cloth over it to keep things looking spiffy. The color is spot on with everything else "espresso" we own and all the shelves were in good condition when I opened the package.

It -isa bit wobbly, so definitely do as they say and place anything heavy on the BOTTOM, not the top. That really should be common sense, though, on something this tall and narrow.

Buy Furinno 99132EX/BK 5-Tier Corner Square Rack Display Shelf, Dark Espresso Now

I have an old, handmade grandfather clock case that had been gutted out when I bought it. I wanted to use the inside as an area where we could put stereo equipment but finding stock shelving has been a problem. We needed something less than 12 in. wide. Found it in this shelf unit. I LOVE that we did not need tool to put it together. Everything screwed in place. It is not the most sturdy of units but then it was not bought for its sturdyness. No one is going to have access to it. The particle board shelves are a little worrysome but the clock case has vents for the speakers so fumes are not a problem. This should not be considered a stand alone unit where children are around, but for adults or as storage in a closet it will work out fine.

Read Best Reviews of Furinno 99132EX/BK 5-Tier Corner Square Rack Display Shelf, Dark Espresso Here

Received this corner shelf and one of the four legs was missing. Asking for the part to be shipped to me is not an option. I have managed to find something in my house appropriately sized to function as a missing leg, because returning the whole thing for a refund (replacement of the whole is also not an option!) seemed like quite a hassle for a $22 shelf. Other than the missing part, I like the shelf and have put it to use.

Want Furinno 99132EX/BK 5-Tier Corner Square Rack Display Shelf, Dark Espresso Discount?

They are cheap. And, the plastic legs are recessed so your actual space to put books is only about 9 inches wide. But, for $20, it does the job.

Save 54% Off

Catskill Craftsmen Pie Safe with Single Door

Bought this item in January of 2013. Don't recall if instructions called for a 2 person set-up, but I assembled it alone and it was no day at the beach. Had a good deal of trouble with the plastic inserts which were cut too thick. Ended up super gluing the door panels to the frame instead. Also had some difficulty with pre drilled holes not lining up perfectly.

Although the side and back panels are not made of fiberboard, they're not solid wood planks either. They are thin plywood layers glued together. Not the "solid wood" construction advertised. Hence, my opinion that as a build it yourself product it was over priced.

On the plus side, it's a good looking unit. The fully adjustable shelves are great, especially since I have varying sizes of food containers, and it's surprisingly roomy. I plan on applying some polyurethane to give it some sheen and make it easier to clean.

I bought this piece to store my dishes after my cheap and flimsy Ikea shelves collapsed and destroyed most of my dishware. (Apparently shelves storing fragile things are not the best thing to economize on. This should probably have been obvious.) This piece is made of solid, beautiful wood -so solid, in fact, that it's also very heavy. If you (like me) live alone in a fourth-floor walk-up, you might want to plan ahead and bribe a friend to help you carry it up the stairs. I had no problem assembling it with the minor exception of the panels on door; as the previous reviewer mentioned, you're supposed to wedge the panels into the door frame using little strips of plastic, and the little plastic strips keep falling out. I don't see this as much of a drawback, though, as the panels stay in just fine. You could also easily secure them with some wood glue if necessary. I oiled the wood with mineral oil at the manufacturer's recommendation, and it's beautiful; while you could certainly paint this piece, it looks fantastic on its own. And hey, no more problems with shelves collapsing or broken dishware. I expect to keep this around for a very long time.

Buy Catskill Craftsmen Pie Safe with Single Door Now

Seville Classics 18-Inch by 34-Inch by 33-1/2-Inch Industrial All-Purpose Utility Cart

This cart is beautiful and easy to assemble. We used it to move a computer from one room of our apt to another, with all the stuff on its desk, and it rolls easily on the big casters. Great for moving things around! It holds a lot, and the rails around the shelves help things not to fall off. Handles weight well, too. Wish I'd had one of these years ago!

I only leave reviews on items that truly live up to my expectations and this one went above and beyond! Easy assembly, heavy duty construction, high quality wheels. Very easy to maneuver around tight corners. I plan to purchase another one.

Buy Seville Classics 18-Inch by 34-Inch by 33-1/2-Inch Industrial All-Purpose Utility Cart Now

First, I want to mention, I got this same cart from my local Sam's Club for $54, and it was offered on the Sam's website for $49.

In any case, this is a very sturdy product with plenty of room.

Read Best Reviews of Seville Classics 18-Inch by 34-Inch by 33-1/2-Inch Industrial All-Purpose Utility Cart Here

So far this is the best deal I've seen on Amazon for a wire shelving cart. It is in fact 'industrial grade' and uses the same gauge wire and posts as commercial restaurant-grade shelving. Wire shelving units often look alike as viewed on a web page but there is a big difference in quality when you see them in person. Namely, the diameter of the posts, the gauge of the wire, the quality of the welds, and the quality and size of the casters. This cart scores an "A" on all points.

Want Seville Classics 18-Inch by 34-Inch by 33-1/2-Inch Industrial All-Purpose Utility Cart Discount?

Given I have few shelves in my pantry, and many small appliances, this utility cart serves my needs perfectly. Each shelf holds up to 100 lbs., and the size accommodates things like my electric griddle and blender well. It arrived in a single box, and went together fairly easily. I was able to put it together by myself.

The wheels roll nicely, and lock, and is easily navigable. The cart was significantly cheaper than most I found in stores.

Save 1% Off

Seville Classics Heavy Duty Steel 6-Tier Corner Shelf

I bought this as a temporary workaround for holding my cluttered pile of living room electronics and subwoofer while re-organizing the house and saving up for an entertainment center. My husband said it was easy to put together and very customizable regarding individual shelf height. There are 4 and 5-tier units available everywhere, but the 6th shelf brings this unit almost all the way to the ceiling and really utilizes wasted corner space. I like the fact that I can get at everything from multiple angles. Later on, when I buy my living room entertainment center, this unit will work well in the laundry room or garage due to the fact that it is so sturdy and space-efficient.

I bought two more units as a temporary workaround for my den/home office setup in a small room that will be shared by two people who need their own individual storage spaces. In my opinion, this is a good price for such a well-built unit.

If you wanted to, you could put a large lazy susan on one or more of the shelves. Just an idea.

Don't forget the fact that it has wheels!

This shelf has rescued my craft room with tons of extra room and goes perfect with the matching shelf (sold as Sam's Club)..I would buy again if needed. Takes about an hour to put together..all by myself..wheels are strong as are the shelves. Well built!

Buy Seville Classics Heavy Duty Steel 6-Tier Corner Shelf Now

Shelf height adjustable in approx. 1" increments so I could customize it to store oversize items, in addition to normal pantry items. Very heavy and very solid. Very stable even when heavily loaded.

Read Best Reviews of Seville Classics Heavy Duty Steel 6-Tier Corner Shelf Here