Ameriwood Laundry Cabinet

I got this cabinet, it is very cheaply made. I had to reinforce the entire back of the cabinet because there is nothing to hold it to the wall. It will not hold the pounds it states unless you reinforce the framework, I used steel angle brackets. For the amount of extras that I put into the cabinet, I could have built one myself.

The package arrived as directed but it was wrapped in such cheap cardboard there were several tears. This is most likely why the hinge hardware was not in the package. Nor were there any assembly instructions. Fortunately, the cabinet was pretty straight forward to put together. But I had to hang them without the doors.

I searched for quite a while on the 'net til I found a phone number to call. When it rang through I got an extension for "Public Relations" that said a spiel about "technical difficulties" and then hung up on me. No joy that day...and since it was a Friday, I figured it would be a week or more before I got any help. I searched some more and found a "parts reorder" form which I submitted, hoping it would end up in the right department.

Sure enough, when I called the following week to see if I could get through, I was told that my missing pieces had been shipped out and I should receive them soon. I did indeed receive them a few days later, was able to install them and the cabinet works just fine for its intended use.

I would rate them a star higher because the cabinets are working...but there are several dings on them from the poor packing. They are made of particle board...so a hit makes quite an impression....all puns intended.

Buy Ameriwood Laundry Cabinet Now

This cabinet fits perfectly in my tiny laundry room right above the washer and dryer.

The assembly instructions were a bit of a challenge, and it took my husband and I about an hour to put together.

You need extra hardware/screws to actually hang it on the wall. (we used 4" screws because that was all we had they were too big)

I also recommended this to a neighbor who also bought one. When they put things in theirs, the bottom fell out because really the only thing holding the bottom shelf on is 4 little screws. They ended up reinforcing it with 2x4s to the floor behind their washer and dryer.

I haven't had trouble with mine. Maybe I just didn't put too much weight inside mine.

Read Best Reviews of Ameriwood Laundry Cabinet Here

PAY A LITTLE MORE , AND BUY SOMETHING BETTER THAN THIS WALL GABINET.

TO CALL TOOK ME ABOUT 30 MINUTES.

Want Ameriwood Laundry Cabinet Discount?

My first one was used for the garage and I just had to come back to get another one for the laundry room.

Save 18% Off

Hidden Storage Decorative Wall Shelf By Collections Etc

nice shelf for the price. Not put together. Just need a good screw driver.

Prety simple. Has 2 open mouth slots on back so you can hook it on a screw or hook.

The design is fairly simple and nice, just as the picture is. Great company :P

I ordered two of these and they are quite nice! The color is rich and pretty, the storage is neat and they are so easy to put together. They look very cute with small picture frames, flowers or small stuffed animals on them. I saw some others that were much more expensive and not as nice. These are a great bargain and I would definetly recommend them.

Buy Hidden Storage Decorative Wall Shelf By Collections Etc Now

Shelf Liners For Wire Shelving - 48w x 24d, Clear Plastic, 4 Pack(sold in packs of 3)

I like the product, but need more size choice. I am using this in a house with a large pantry and the shelves are not as deep as a restaurant shelving unit.

Stacking Wire Storage Cubes - Set of 4 in Silver

I have had sets of these wire bins by Neu Home for over 15 years. You can take them apart, place elsewhere, stack higher, they are extremely versatile & also VERY strong. I have bins on top of these that hold 30 pounds of items that I use every day in my business. The cubes don't shake, bend or show any signs of use. They have really been put to the test of time & abuse by me & I love them. I actually bought them as an inexpensive form of table but I also use the bins for bookcases & my cats like to sleep in them. I'm back on Amazon buying some more to use as my business expands. I highly recommend these. They probably would be great for college dorms, your child's storage needs, kitchen clutter cleanup (where to put the blender, the waffle maker, the juicer when not in use) etc. They are very easy to put together & take apart & lie flat when stored.

Hi! I just sat down at my computer after the 3rd time my storage squares fell completely apart on me!! I WAS UPSET! I went through the hassle of putting them together and snapping the little circles for them to fall apart on me. FRUSTRATING! The only issue is nothing else seems to be out that will fit my bedroom decor--I am "this" close to throwing them away. Maybe I'll buy those twist tie things to secure them like another reviewer said. You shouldn't have to buy additional things though. All you need is supposed to be included.

Buy Stacking Wire Storage Cubes - Set of 4 in Silver Now

I purchased these for my daughter to put in her closet for clothing. I also purchased the Cables To Go cable ties based on Amazon reviews recommending that the fasteners that are included don't really do the job of keeping the cubes together. My daughter was well satisfied.

Read Best Reviews of Stacking Wire Storage Cubes - Set of 4 in Silver Here

This brand, or version or style is a finer wire than my previous setI bought these to make a larger system, and they didn't really merge well. As a stand alone they were pretty nice, lightweight and attractive.

Want Stacking Wire Storage Cubes - Set of 4 in Silver Discount?

I bought a few of these for my closet to put clothes and other random things. They're great because they're small and fulfills its purpose. However, the plastic circle that keeps them together sometimes wiggles itself use after prolonged use, which causes it to start collapsing. Overall, it's still great :)

Range Kleen 2 Shelf Wall Mount Black Pot Rack

I've read the reviews and would rate the installed product with 5 stars. It's sharp looking, very functional, and if installed properly should stand up for a long time. That being said the key word is to install it PROPERLY. I looked at their installation video twice before installing it and read the critical reviews posted here.

Do yourself a favor and toss their so called installation hardware. You're going to need four spring action anchor bolts and you'll also need to drill a hole in the top center rack. You can't do the same on the bottom rack as it is recessed. MOST IMPORTANTLY, make the center hole that you've drilled line up with a stud. Their video says to "get as many of their predrilled holes to go into studs". Unless your house is built with horizontal studs (I jest) that will never happen. You probably won't want one of the other holes which are off center by 5 inches on the top and more than that on the bottom to be the one going into the stud. That can only tend to make the unit list to one side when you load it with pots and pans.

For just a few cents more they could have included spring action anchors and drilled the center hole that I referred to. They also could have made it easier to access the screws which you will need to tighten as this requires a short or off center screwdriver.

Oh well, I had nothing else to do that morning. Good Luck !!!

Very solidly built. Heavy and sturdy. Screws are provided for mounting to your wall but I would get molly bolts instead. This rack is heavy and with all the pots and lids on it, a more secure mounting is needed.

Buy Range Kleen 2 Shelf Wall Mount Black Pot Rack Now

My wife picked this out a couple weeks ago and we couldnt be happier with the look. It was pretty easy to install. Id recommend that you find at least one stud to secure this to, as molly-bolts can work their way out with a heavy load like pots and pans.

We plopped a little potted plant on the very top rack and it really ties the kitchen together.

Read Best Reviews of Range Kleen 2 Shelf Wall Mount Black Pot Rack Here

Perhaps I'm being a bit too harsh on a product that cost me $42, but this was an absolute nightmare to mount sturdily.

Before I get into what was required, I will give you the GOOD.

Once mounted it looks great. The pictures of the black mount show far more sheen on the black metal than is actually there, it's almost a matte black and looks very sharp.

The form factor is also just fine, two shelves are nice to have.

The hooks are the same matte black as the base, mounting the hooks on the inner grating seems necessary to get what you want to hang in the right place, but they have a tendency to shift and clang around a lot when you do this.

For ~$40, it's a steal, except...

The BAD:

The mounting hardware they give you is totally inadequate; You need one strong woodscrew or lag bolt screwed into a stud in the top center mount, otherwise any substantial weight you put on it will probably come down crashing in the middle of the night (like some reviewers have claimed).

The mounting scheme for the top shelf is poorly designed. Don't let any reviewer here tell you differently, more than 10lbs of weight on this shelf will make the metal at the top sag. When you put weight on it, all of the force is exerted at either edge of the top shelf. There is only one screw in the top, and it's in the *center*. When it's secured into a stud, instead of crashing down, the metal simple deforms and bends around that center screw. This is what people mean when they say it *sags*. And yes it does sag, no matter how heavy duty your mounting hardware is.

I could not tolerate this, I got around it by doing the following. I drilled two additional mounting holes on either side of the top shelf and anchored them with drywall screws. Due to the curve of the shelf, it's almost impossible to actually screw these in (probably why the designers didn't put them there). You have to use an extremely short screwdriver, or a ratchet with a phillips screwdriver and a lot of patience.

Putting it all together and mounting it to my satisfaction took me at least an hour, but once I added the additional mount points, there was no sag. It's not so solid it still doesn't bend or bow a bit when I give it a good tug, but it's not visibly deforming with 25lbs+ of cookware on it. Two design flaws: the metal is just too soft for this purpose, and you need mounting points at the edges of the top mount. I wanted to get two of these and mount them next to eachother (hey, I have a lot of cookware), but now I'm reconsidering it, even with such a great price.

Want Range Kleen 2 Shelf Wall Mount Black Pot Rack Discount?

I had checked the restaurant supply store in my area for pot racks, but all they had were the straight stainless steel ones. I found this rack after some research and decided it was the best I could get for my money. I received it, put it together and mocked it up on my wall. The first thing that I noticed was the lack of a second mounting hole on the top shelf. The bottom has two holes, but the top has one directly in the center.

This alone made me question my purchase.

After mounting the rack with pop-toggle screws from HD (the included anchors for this rack gave me nightmares of failure in the middle of the night), my questions were answered. The top shelf was bowing out away from the wall! I hung my 14 piece Cook's set from JCP on the bottom shelf with the supplied hangers, and the top was bowed out a good 1/4" at the corners.

We'll see how long this lasts. I suspect the first spot to fail will be the top mounting point.

NOTE TO MANUFACTURER: Please use the same locations for mounting screws for the top shelf as you do for the bottom.

Save 42% Off

Rubbermaid Configurations 4-to-8-Foot Deluxe Custom Closet Kit

I have used all three of these. I first bought the Elfa (Container Store) for one bedroom. It was extremely expensive. Spent 5 times more than the others for something very simple. Everything is cut for you once you have the measurements. It is very sturdy and very well made, of course. It is probably over kill for a closet organizer. They have a lot of nice accessories for it and can be dressed up to look nicer than the others. Biggest negative which really surprises me since Closetmaid and Rubbermaid doesn't have this problem is you can't slide a hanger all the way across.

My next project was using Rubbermaid. I liked the idea it was adjustable. It was very easy to install. I bought the delux 8 feet kit. One problem is you will sometimes have left over parts and in my case I also had to buy one extra part since the way I wanted it was a little different that what options you had with their kit. After installing it I found I just didn't need to change it, so the adjustability probaly was not a plus for me but some people may want to make changes after using it for awhile. Biggest negative which really isn't a negative is that it is flimsy compared to the Elfa which is like a tank. That is because it is adjustable but it is sturdy enough. I have no problems with that. Another possible negative is it only comes with 12 inch shelves for closets. If you really need something bigger you can go into their garage sections which has 16 inches shelves.

My last project was Closetmaid. I used Closetmaid for my wife's closet since she wanted 16 inch shelves and I didn't feel it needed to be adjustable. Now if you don't want to be doing your own cutting which can be a chore without the right tools then go with Rubbermaid. But I have the right tools so cutting was not a problem. I bought mine at Lowe's. If you have all your measurements you can do the cutting their. They have a bolt cutter that cuts right through it. I did all my cutting at home since I have bolt cutters and metal saws. I like Closetmaid since it was sturdier than Rubbermaid and I just buy what I need. It also has a nice selection of accessories from wire drawers to shoe organizers. What I really liked is their clothes hamper. It pulls out on a slide then pushes in after you throw your dirty clothes in.

Now the surprise is the vertical hangers for all three companies all have the same slot design. How the verticals hang on the wall is differnt but once you have the vertical hangers secured you can interchange most accessories. I can install shelf supports for any company on any one of the vertical hangers. So I used the Closetmaid clothes hamper in my Rubbermaid closet. Closetmaid shelf supports and shelves will fit on the Rubbermaid or Elfa vertical hangers and vice versa.

If money is not a concern then buy the Elfa, built like a tank will last forever and looks better than the others with the right accessories.

Rubbermaid is the least sturdy of the three but does the job. It is very easy to put up so if your not handy around the house then buy this one. You also can easily make changes to how you want the shelves organized much more so that the other two. If you want 16 inch shelves then look at their garage organizers, the system is the same.

I like Closetmaid but it does require more work to put up since you have to do all the cuttings. It is much sturdier than Rubbermaid since it is meant to be permanent once you put it in. Shelves snap in place which took some effort and would be difficult to remove. Rubbermaid has a simple slide to lock shelves in so you can makes changes easily but then again you give up some sturdiness.

Update 12/12/2011

After having used all three systems for almost three years I can say all of them hold up well. I haven't had any problems so my original feeling that Rubbermaid tend to be flimsy is still not a problem. I don't think you can go wrong with Rubbermaid and it is very easy to put up and being adjustable gives you room to customize the way you want it. Having parts left over is more of a mental problem because the cost of the kit is still probably cheaper than buying each part by itself even with the left over parts or you can try using all of it. Also as I said before you can use Closetmaid accessories with Rubbermaid and although I like my Closetmaid clothes hamper it did fall apart which was replaced by Lowe's at no cost.

I recently did my daughters closet using Rubbermaid but these were not adjustable. You buy what you need and cut to fit (Home Depot). These being not adjustable felt much sturdier. I did find putting in the shelves to be easier than Closetmaid. Closetmaid shelves snap in and are very tight. The Rubbermaid ones were just easier in that it has a slide that locks the shelves in place but Rubbermaid is more expensive than Closetmaid so you pay for this one feature.

I wanted to post a review that addresses why a lot of people look into Rubbermaid Configurations to get a cheaper, comparable version of Elfa shelving. Some on here claim that this is just like Elfa, minus Elfa's high price. That's how I found out about Configurations and compared the two.

The problem was, my fiancee and I had already looked at Elfa shelving with the Container Store closet designer and had that system on our minds when I started looking at Configurations. It's not quite apples to apples as some people claim.

To look at the system, I ripped open a box at Target. Three things I noticed that made this system different.

1. Some of the smaller pieces are plastic. Elfa is all metal/steel. Granted its not the pieces that "count" i.e. the tracks, shelving. But its not quite the same quality.

2. The shelves are a foot deep at most, and there are no other options. With Elfa you have the option of getting deeper shelves and yes, for some folded clothes those extra inches matter.

3. As some on here have noted, for full closet systems you may end up buying two sets of the Configurations systems in order to get all the pieces you need. But I priced what I would have needed at around $200, which was $100 less than the comparable Elfa system for my closet.

This system is fine for kitchen, garage, office, kids room organization for this, Elfa is probably overkill. But for a master clothes closet, the shelf depth was the killer. I ended up biting the bullet and buying Elfa.

If you think this might work for a clothes closet, my suggestion would be to visit Container Store and get a closet layout from a consultant there. Then take that list and see how many Configurations sets you need for the same layout. You'll probably come out ahead cost wise. If you wait until Elfa is 30% off around the holidays, though, the gap will narrow.

Also worth mentioning is that the Configurations platinum system (and of course white) look very similar to the untrained eye to Elfa. So another option is to use this as your shelving and invest your money in the Elfa stand up drawer units to complete the closet. These are where the real expense is. But a combination of the two will give you a pretty killer closet.

Buy Rubbermaid Configurations 4-to-8-Foot Deluxe Custom Closet Kit Now

My wife and I were looking for an open closet and got some quotes from MDF and wood closet makers. The ones that we cared for were above $800!

This system looks OK and is easy to install. We went for the Deluxe Kit, and we got some accessories too: two wire baskets and a trouser hanger. Everything was below $500.

It took me 12 hours (not one as other lucky reviewer), but that includes removing all the clothes from the other closet, removing the other closet, going to the hardware shop to buy a 3/8" drilling bit and anchors for masonry wall (ours is not drywall), drilling the masonry wall, installing the closet, trying different configurations, going to a Christmas Party in between, installing the accessories AND putting the clothes in the new closet.

Overall, one of the greatest gifts we bought for ourselves this christmas. I'm very happy with it. Yesterday I started rearranging it again to better optimize space.

Some words of advice:

1. The Deluxe kit we got comes with a LOT of shelves. But because we also got the accessories, we couldn't use all the shelves. I wonder if the Classic Kit + Accessories would have suited us better.

2. We got two shoe racks as accesories to this closet system, but returned them the next day (exchanged them for a wire basket). These take up too much space of the closet because you have to put them in the rails. It's simpler to purchase a longer shoe rack separately that you can put on the floor.

Read Best Reviews of Rubbermaid Configurations 4-to-8-Foot Deluxe Custom Closet Kit Here

Excellent closet kit. We ordered two 4-8' deluxe custom kits. My husband and I each have an 8' closet. Kits were very easy to install. By the time we got to the second closet we were pretty fast. Took about 1 hour to install the second closet system. The closet design is great in that there is no cutting with the exception of the last rail cover. Love that the hangers slide easily, our previous closet "system" only allowed a couple of inches either way. The flexibility of the closet is amazing. We also ordered for my husband the shoe shelves, tie and belt organizer, and two sliding pants racks. For me I ordered three sets of shoe rods, two pants racks, and one sliding basket. We also ordered 3 upright extension rods for each closet due to the number of accessories we ordered. I had so much fun playing around with the expandable hanging rods, the shelves, and all the accessories. I now have my closet organized and I cannot believe how much room I have for everything. I even have "room to grow". I highly recommend this closet system.

Want Rubbermaid Configurations 4-to-8-Foot Deluxe Custom Closet Kit Discount?

We started our closet "improvement" by first going to the Closet Maid site & using their "free" online design tool. Being free, it was totally confusing & kluggy to use. So I then used their $5.00 premium online design service, which gave me (2) designs along with a parts list. This is the part that drove me crazy...the parts list was complete, but it directed me to retailers like Home Depot but the disclaimer states that "a particular store might not carry all the parts for your design"!!?? I then asked the CM site if we could order all the parts directly from Closet Maid, only to get an email back stating that their partnership agreement(s) requires them to direct us to Home Depot!! I could not bear the insanity of driving to half a dz. or more Home Depots looking to fill the Closet Maid parts list. Enough said, they eliminated themselves from consideration.

I then came across the Rubbermaid systems on Amazon and after reading the many positive reviews I took the plunge & ordered (2) 4-8 ft. & (2) 3-6 ft. Deluxe Custom Closet Kits to improve our small MB walk-in & my 12yr.'s 6ft. closet.

It took longer than 1 hr., but much less than 12 hrs (you will spent a great deal time measuring, climbing up & down the ladder, switching drill bits for screw tips, etc...), unlike several of the earlier reviews I had read. It took about 6hrs. total this past Friday to install (2) of the 3-6 ft. & (1) 4-8 ft. kits in our approx. 6' x 6' walk-in. The 1st kit took the longest. Once I understood how the first kit worked, I really cranked after that. A few crucial points:

1) Make sure you have a level (I found a 2ft. one worked great!), a good cordless drill with 2 fully charged batteries (if your screws hit studs, which is what you want, it will take a lot of juice)with good phillips screw tips and a sturdy 6' step ladder.

2) Get a 3/8" drill bit....most households typically won't have one larger

than 1/4"...this is the hole size for the sheet rock anchors. I didn't have one either so I had to go get one after opening the box! this is the only thing I had to buy, aside from the extra 25" vertical ext. bars & extra shelves. Rubbermaid also provided more sheet rock anchors than I needed (that's a first!). So unless you have a cinderblock or stainless steel wall in your closet, all the req. parts come in the kits.

3) MAKE SURE THE HORIZONTAL MOUNTING BARS ARE MOUNTED STRAIGHT & LEVEL (first thing that goes up)OR YOU WILL LIVE TO REGRET IT! USE THE LEVEL CONSTANTLY ON ALL THE HORIZONTAL & VERTICAL BARS!. After that, the brackets, shelves & hanging rods just pop in based on your configuration.

4) Buy extra 25" ext. bars, each kit only comes with (2) per kit. You will need the extras if you want to max. use on the kits.

All in all we rate this an excellent product. Quality was excellent (all the parts fit!). Instructions & assembly was clear & easy to follow and was actually fun once you got the hang of it. The Amazon pricing & free delivery made it a clear choice above competitors like Closet Maid & Elfa (The Container Store). And most of all it looks great (metallic/pewter coated finish) & works well. We figured it will take us an hour or so to install the last kit in my daughter's closet. We will definitely use their kits again.

Thanx Rubbermaid & Amazon for "PIMPIN OUR CLOSET"!!

Save 47% Off

Thunder Group CMSV1824 Wire Shelves 18"X24" Heavy Duty Chrome NSF, 2 pcs

I've had chrome NSF shelving for years now. One of the great things I like about it is the ability to take it with you when you move. Further, NSF shelving is overbuilt because it is made for heavy industrial use. My recent addition is for a food storage closet (pantry).

1. Shelving alignment: Sometimes, when I have purchased NSF shelving, one of the shelves can be off a bit, creating a real problem trying to get the shelves to line up with the posts. There was no alignment issues. 5 Stars.

2. Chrome Finish: The chrome was not perfect, and clearly there were some small areas that didn't have any chrome. 3 stars.

3. Quality: It appears that some of the metal wires were cut short, and the welds to the post holes had to be extended. This makes the shelves less strong and I would consider these factory 2nds. However, because I am using these for home use, I am never going to be putting the same demands on them as they would have been built for. 3 stars.

4. Shipping: The items arrived on time and in good condition. 5 stars

Even though I rated these as overall 4 stars, they are still an excellent value to any home owner looking for sturdy shelving for food storage, especially for heavy canned goods.