Best of Times Dale Earnhardt Jr Standard Package Bar

This is an amazing product great for tailgating or RVing at NASCAR. Used it at our spot in the infield recently and everyone who saw it asked where I got it. Very easy to put together and take down, the rolling bag makes it easy to transport. Would by it again in a minute.

Save 9% Off

Nexxt by Linea Alton - 3 Tier Wall Shelf

I was looking for a nice shelf for my office to fit in alongside photos of my extended family where I could store a few rather large books that I refer to on a regular basis. This took them off my desk, yet kept them readily available and the shelf looks GREAT next to my photos artistic in style all on it's own. With a round candle on the top, it's very attractive! Might buy another for next to my bed. I hate a cluttered nightstand, but like my books and magazines close at hand.

Two of the pieces were made incorrectly but didn't figure that out until I had holes in my walls. There is no way to contact the company who made this shelf so your only option is to return it. I understand mistakes can be made but there should be a way to fix this without me having to put more time and money into it. Extremely disappointed. Amazon shouldn't be selling this on their site.

Buy Nexxt by Linea Alton - 3 Tier Wall Shelf Now

I ordered two of these shelves. I can not believe how cheaply these are made. Almost every piece has chips around the edges and scratches. I was hoping I would at least be able to piece together one shelf using the least damaged sections from each package. No such luck though, the same piece in both packages is completely broken or cracked and in the process of breaking. Do not order this product if you don't want to end up completely disappointed.

Read Best Reviews of Nexxt by Linea Alton - 3 Tier Wall Shelf Here

I really liked this easy to put together item. It was very substantial looking and looks great in the space!

Want Nexxt by Linea Alton - 3 Tier Wall Shelf Discount?

I got this shelf to display a small mineral collection and it actually worked pretty well. I was disappointed that it was made of plastic and not of real wood. However, you do not notice that this is not wood unless you examine it really closely. It is fairly heavy and requires putting thick nails into a wall. The back board is on a heavy/thick side. I think, if it were thinner, the shelf would have looked better. Not withstanding all this, I like how this shelf works above my desk. There are no large manufacturing defects and assembly was easy.

Save 24% Off

KV Heavy Duty Shelf Standard Decorative 39" White

Excellent product at a very reasonable price. Better quality than available at the local hardware stores. One thing to note: 1) Order a quantity of two (2) because these are being sold per piece.

Akro-Mils 39085 Plastic Storage and Distribution Container Tote with Hinged Lid, 21.5-Inch L by 15-

worked for what I do. I could use a few more and will order so I can get more.. bam

These flip-top boxes are not only a great, handy size, the quality is far greater that the flip-top boxes you find at Home Depot or Costco. These things are masde of a more forgiving plastic (and thicker) than the usual see-though type. Only wish they came in a variety of colors. 4 instead of 5 stars because the finish on the edges could be nicer (smoother, less sharp.)

Buy Akro-Mils 39085 Plastic Storage and Distribution Container Tote with Hinged Lid, 21.5-Inch L by 15- Now

Spectrum 51770 Under The Shelf Mug Holder, Chrome

This holder is pretty cool but I have 2 problems with it. First, it has pegs to hold 8 cups but I can't get 8 of my cups on it and my cups aren't overly large. Second, because of the way it fits over the shelf, the door of the cabinet hits the "arms" and prevents the door from closing all the way. I can deal with both of these problems and consider them minor so I still give the holder 4 stars.

This mug holder looks nicer than many, but the way it is built, it is virtually useless unless you have very skinny shelves. It is all one piece that is supposed to slide onto a shelf, but if it isn't a small shelf, it won't fit unless you bend it far apart. Then, once you get it on the shelf, you can't put anything directly above it due to the thickness of the piece that holds it in place. It causes anything up there to fall over because it can't sit straight. I am going to be purchasing a different unit because this is pretty much worthless.

Buy Spectrum 51770 Under The Shelf Mug Holder, Chrome Now

There are more hooks than needed so you can fit the highest ammount of unusual sized mugs. I bought two and fit 6 regular mugs on one and only 4 giant mugs on the other. My narrow width shelves are set in so the rack slips on and does not get in the way of the doors. The mugs hang freely which means they lean forward so I can't slam my cupboard doors or I'll smash my cups but who does that anyways? The doors close easily. The metal holder does stick up on the upper part however it's symmetrical so large flat plates fit nicely, or bowls centered. But I wouldn't put more cups above it without laying a flat cutting board or something similar.

Overall the best looking mug racks durable, well balanced, and above all else functional!

Read Best Reviews of Spectrum 51770 Under The Shelf Mug Holder, Chrome Here

Although it has the capability of holding 6 cups, it can only accommodate 4 regular sized mugs. One gripe, although expected, is the top rods that hug the shelf. They can be made flatter to better utilize the above shelf.

Want Spectrum 51770 Under The Shelf Mug Holder, Chrome Discount?

The hooks are spaced a little too close together to hang normal coffee cups on each one. Teacups would probably be fine. Once filled with cups, the rack sags a bit at the end that isn't anchored.

Save 8% Off

Sonax BL-6440 Berlin 44-Inch TV Bench with Solid Wood Uprights

This entertainment center came out very nice looking, even better than what the pictures led me to expect. It was also delivered fairly quickly. One issue I had was that the package of screws broke open in transit, and the hardware managed to get scattered throughout the big box. The screws did cause a few scratches in the finish--but fortunately nothing too visible--and I had to conduct a search through all the packing material to find every last screw and anchor I needed to complete assembly. Many vendors now provide a few spares in the screw package, which I think would be cheap insurance against unhappy customers, especially since this is not common hardware store stuff. The other issue is a typical one for this type of furniture, and that is the closed back inhibiting airflow to the electronics. This is usually a problem with this type of furniture if you're not getting an open shelf system, and I plan to modify mine to improve that situation. All in all, I'm very happy with the purchase, it really is very elegant looking.

I purchased this unit as I wanted something with glass doors and some open space for any future electronics that need more airflow for cooling. The stand is quite heavy the box is around 145 pounds, so keep that in mind for both delivery and assembly. One person can assemble but having a helper would cut the time down a bit. I spent about an hour and a half putting mine together and I would consider myself reasonably handy.

The assembly is typical knock down furniture, so if you have ever put something together from IKEA or similar you should be able to handle this. The only tricky part is aligning the four glass doors, and this is the reason I gave it four stars instead of five I would urge the manufacturer to use 35mm cup hinges for the glass doors which are far easier to adjust, and would only add a few dollars to the cost. Admittedly it would require a significant redesign to accommodate these, but the added durability and speed of installation (would have saved 20 minutes or more, no kidding) would be worth it.

Some specific suggestions about the assembly. Make sure you put it together on a surface that protects the finish, and gives you room to spread out. I assembled it on the living room carpet. Take a couple of minutes to sort and inventory the hardware before starting everything was there in my package, but a spare or two would have not been a bad idea.

I used a #2 Phillips screwdriver, needle nose pliers and a small hammer to assemble the unit. Make sure the screwdriver is good quality and in good condition, as some of the screws can be stripped easily, especially if you use a worn tool.

Study the instructions first, and then start the assembly. It is straightforward, but there are a few points when more care is needed.

If you are not used to handling the small brad nails that secure the back, use a pair of needle nose pliers to grab the brad near the tip and hold in place while you tap them in place. Your fingers will thank you! You may want to think about your equipment and drill or cut extra holes in the back in you need to before installing this piece, as it will be much easier to do it at this stage. In particular, I would make sure that you cut holes if putting a gaming system or other unit that runs hot even better would be to put them on the open shelf above, as lack of air circulation is a killer for these types of electronics.

When you screw the cam posts into the solid wood legs, coat the threads with Beeswax (available at a hardware store) or drag the screws across and old candle. The wax will lubricate the threads and make them much easier to install. This is a good idea when screwing the metal bars that support the top into the legs in the next to last step too. It also helps to apply firm downward pressure with the palm of your hand to the top of the screwdriver while turning with your other hand, as these types of screw are easily damaged if the tip slips.

When installing the shelves, leave out two of the supports on one side, and turn the shelf at an angle to put them into. They will fit, but the fit is close. After you get them in you can install the final two supports.

The doors are a pain, but if you take your time you can get even seams. On my unit, a 3/16 gap was about right. Tighten the screws that hold the glass to the hinges and then back them off about a half turn. You can to gently maneuver them into place and then snug them down. Get all four doors up before you spend too much time aligning them, as you will want the center gap to match the two door gaps. For the metal u-shaped pieces that act as the magnet catch, I found that peeling off the adhesive backing and holding the adhesive, sticky side up to the door as I slide them on from the top worked best. I did pinch them a little to improve the fit. Again, a higher quality bit of hardware here that used screws and rubber instead of adhesive would have saved time.

Since they give you more of the rubber dots to support the top than the 8 specified, I used 10 to support the top. This way, I could line them up using the door seems as a guide. The top has a warning that it's maximum load is 200 pounds; this should not be an issue for just about all flat screen TV's, but do be careful if you put other things on it in addition.

All in all the final assembled piece is worth the effort, as it is solid and very good looking., The wood pillars in particular are a handsome design element, and are made out of a nicely finished, very dense hardwood. I did note a couple of small flaws in the finish, but because all the legs are the same part I was able to pick two that look perfect for the front.

Take your time with the assembly and you will have a very nice piece that will look great in my room and last for a long time.

Buy Sonax BL-6440 Berlin 44-Inch TV Bench with Solid Wood Uprights Now

The stand arrived with no damage to any items internally and just the normal wear to packaging during shipment. Overall I'm very happy with the stand. I looked through literally hundreds of stands to find a unit that could accomodate my Yamaha Receiver which needed at least a 19" depth. Very nice stand. Nicer looking than I thought it would be with the black glass top. The only issue was one of the screws was malformed which holds one of the metal crossbars between two corner posts. Didn't notice it until I had tried to screw it in all the way and it never fully secured. I pulled it out and the hole was basically stripped. Either a longer screw or bigger screw was needed to fix. I went to HomeDepot and found a suitable replacement a #14 4" wood screw which fits the hole and holds it securely since it's longer. Instructions are simple and it goes together pretty quickly.

The color of the wood posts is pretty accurate to the internet picture, at least on my monitor, if you're trying to match other furniture. Would buy again or recommend to others.

Read Best Reviews of Sonax BL-6440 Berlin 44-Inch TV Bench with Solid Wood Uprights Here

We purchased this piece to hold a new 60" TV within a 64" space. Product arrived without any shipping damage, which was my first concern when ordering rather than purchasing locally. This piece is heavy and well constructed. My husband put it together in approximately 1 hour and 15 minutes. It looks great in our living room.

Want Sonax BL-6440 Berlin 44-Inch TV Bench with Solid Wood Uprights Discount?

Well packaged and easy "IKEA" type assembly style. I would advise drilling out certain screw holes as the philips screws are soft and tend to strip out on the heads. Go slowly, take your time and the results are rewarding.

Rubbermaid Configurations 3-to-6-Foot Classic Custom Closet Kit

This closet kit was simple to use and sturdy. It took my husband one hour to complete the first closet system and 30-45 minutes for the second. It has made a HUGE difference in my children's closet and we can't wait to finish the rest of the closets in our house. We live in a 57 year old house with not much closet space and standard rod hanging systems. This system gave us a tremendous amount of clothes hanging space.

My number one concern prior to buying this was that I am in new construction with metal beams; so I would be using the drywall anchors solely and I had a ton of clothes; my guess it probably something like 160 pounds of stuff total for the closet. Well after installation the whole system (even without going into studs) was very sturdy.

I looked very closely at the Rubbermaid and Closetmaid systems and also looked at some of the custom closet solutions (Like elfa). I ended up going with the Rubbermaid and am very happy I did; the production value on the Rubbermaid top notch, very sturdy with good finishes, plenty of parts. Using the wall anchors I piled everything into a 4' closet with I would say about 95% utilization.

I had a Closetmaid partical board system before and although it cost the same amount roughly... it wasn't configurable, had cheaper parts, worse clothes rod, and a cheaper less sturdy feel.

Buy Rubbermaid Configurations 3-to-6-Foot Classic Custom Closet Kit Now

I actually ordered 2 sets of these. Each took a wall in a walk in closet. I ripped out the Closetmaid crap the plastered the holes. The finish on the Configurations was so nice, I decided I couldn't just put it up without painting the walls. Yep, I painted my walk-in closet, and installed a stainless steel 3-halogen bulb light fixture to match. I also left enough room in my 9' tall walk-in for top moulding to boot. I figure, the closet is one of the first rooms you enter every morning of your life, why not bring it out.

I took my time on the installation, to get the measurements correct. I had one trouble spot where I hit some metal joiners where the stud was. Metal screws fixed the problem easy. My g/f and I are both 6 foot, so I actually set it up higher than the instructions say to. I took the extra bottom space and just mounted extensions for accessory shoe racks. All our shoes are now off the floor and high enough I can run the vacuum through. You will need the shoe racks.

I have double the space in my closet now, and I've used every bit of it.

Read Best Reviews of Rubbermaid Configurations 3-to-6-Foot Classic Custom Closet Kit Here

Some notes for those who want to buy this:

#1) DO IT! You'll love it.

#2) Getting started with the very first piece takes the longest. Then it's a total breeze from there!

#3) At the VERY BEGINNING, make sure you are making marks for where you will be screwing into studs, and making different-looking marks where you'll be using a wall anchor you will only need these marks for the top bar that goes all the way across, and only as high as you want the unit to go (meaning the placement of the top shelf or bar).

#4) Directions didn't tell you this (and for some people it's probably obvious), but use a 3/8" bit to drill the holes where you need to use wall anchors, and a 1/8" bit to drill where you'll be able to screw right into the stud. (That's 3 steps for every place you'll be attaching the first bar: mark the wall, make a "starter hole," install the anchor/screw.) I may be an idiot for not knowing that to start, but had someone told me that in the beginning, I could've chopped off a half hour of assembly time! (Now I know for future things as well. :)

#5) You will need 4 leftover screws after you install the top bar these are for the hanging bars, so be sure to set them aside at the beginning, and use the rest to secure the top bar.

#6) They give you specific measurements on the distance between the hanging bars: make sure you start at the far left and far right like the directions say (6" from the wall), but you can space the middle 2 bars wherever works for you.... just note that you may have to cut the top bar cover to fit (which is a nice touch to make it look neat).

It only took a TOTAL (from unpacking the box to starting to put stuff away) of an hour and a half to finish!!! And that's by myself, a 5'3" female who is totally awkward when it comes to putting stuff together!

With the end result of this thing, I LOVE IT. My closet fits so much more and is SO very organized especially for a SMALL space (my closet is only 5'w x 6'h x 2'deep) and has to fit everything from clothes and shoes to luggage and books. I was in such desperate need, I even paid for overnight shipping. :( But I will definitely buy another one when I have another closet that needs to be organized!

The instructions could be a bit clearer, especially for someone without much (if any) experience hanging stuff. I had to call my dad to have him help me understand the directions. Another small complaint: they aren't entirely specific on how many screws you need where. You have to do the counting as you read through the instructions in advance. So I included that in this to hopefully help the next person out. Whatever small frustration I had with the directions TOTALLY PAYS OFF with the end result.

Also, I shopped around for an organizer for a while, and for the price (especially!) and what you get, the value of this is AWESOME. Enjoy your newly nice and neat closet! :)

Want Rubbermaid Configurations 3-to-6-Foot Classic Custom Closet Kit Discount?

This is a very easy custom closet configuration system to install. I like that the rails attach to the wall and don't have braces that take up more room. It is very flexible because once you have the rails attached you can put the shelfs and rods where ever you need them.

Save 60% Off