Showing posts with label buy shelving. Show all posts
Showing posts with label buy shelving. Show all posts

Tuesday, October 7, 2014

FURINNO 3-Tier Open Shelf Bookcase Shelving Unit

FURINNO 3-Tier Open Shelf Bookcase Shelving UnitIt was probably the cheapest shelf I could find on amazon. Although it looks nice in picutres, there are a few differences. The screws on the side are not visible in the pictures, but they are VERY visible once you've finished assembling it. Also, the laminate used to cover the edges of the side boards is not well attached; it was actually peeling on the backside. I was able to trim i and luckily no one will see it since it will be against a wall.

I bought this to store my books from college. It is the perfect size, as I placed it next to my desk. The color is close to birch wood. Be sure to Bang those screws in hard for a nice firm feel. The wood pieces felt good (heavy), not cheap. It looks like a nice little book shelf. The photo is pretty much on point!

You get four horizontal pieces, two longer vertical pieces, and two sets of screws( one thin set one thick set). I put it together in 30 mins, easy. It didn't help that the directions are ONLY in Chinese.

ConsThe back of this unit is ugly. dull brown. lean this up against a wall. to be fair, most dressers have the same back.

Proseasy set up (2) great feel. (3) just buy it, its good Im glad i didnt listen to the bad comments! its simple and versatile

Buy FURINNO 3-Tier Open Shelf Bookcase Shelving Unit Now

Sturdy construction, easy to assemble. Instruction manual only in foreign language, but assembly is pretty self explanatory. Very well described.

Read Best Reviews of FURINNO 3-Tier Open Shelf Bookcase Shelving Unit Here

Low quality, came already scratched on the factory. Laminate comes off already after two weeks.

Pictures on website looks good, but actual product is very flimsy, made from very thin particle or composite boards.Actual shelf load less than 10lb.

I bought it as a bookcase, but it cannot serve the advertised purpose. Would not recommend it to anybody.

Want FURINNO 3-Tier Open Shelf Bookcase Shelving Unit Discount?

This shelf is good quality and very easy to assemble. Very quick delivery great product. I would definitely recommend this product to anyone wanting a small cute shelf!!! :D

Save 44% Off

Friday, September 5, 2014

AVF ES250B-T Wall Mounted AV Component Shelving System with 2 Adjustable Tempered Glass Shelves -Bl

AVF ES250B-T Wall Mounted AV Component Shelving System with 2 Adjustable Tempered Glass Shelves -BlackThis was delivered in one day. Good Condition. Picture instructions easy to follow.

Wasn't a wood stud where it needed to be installed. I tried using supplied drywall anchors and screws. The plastic anchors messed up using an electric drill and screws were to large.

I had the common problem of creating a rounded out hole to big for the anchors.(stuff happens!) So,I checked my surplus hardware stash and found two metal drywall anchors with the spring loaded wing-nuts that lockup against the inside of the drywall. These are the best for any weight bearing install.

I didn't rate the shelf system 5 stars because of the supplied anchors & screws.

The shelf system was great and goodlooking. A very sturdy shelf holds the cable box and above on the next shelf is my blu-ray player. Adjusting the shelves was easy. I really liked being able to arrange all cables neatly through cableways on each side of the base and behind the shelf holders. This made a nice clean setup. Very pleased with the final results.

I experienced no instability in any of the shelves as I read in some review. This my be because of the use of the supplied anchoring hardware. Before install, go to the hardware store and get better hardware for the drywall. In my opinion, the metal wing-nut toggle bolt type are the best for load bearing shelving.

I for one am all about aesthetic appeal when it comes to our television setup in each of our rooms in our homes. I am a wire hider, I would rather climb up in a 130F attic and hide wires than see them any day. We purchased this product for my son's setup in his room, we mounted it right next to his 47" TV and he keeps his Playstation and XBox on each shelf, the wires are nearly completely hidden as they're so close to the TV that they simply are running directly behind and plugged in (excess is wound up and zip tied behind the TV). We chose to mount the shelf to the side of the Television because he had a shelf below with his stereo, etc, and the aesthetic appearance worked better off to the side. It would look amazing with one set on each side, but he has no need for two sets. The product was very easily assembled, and the glass and finish gives it a very contemporary look. I would recommend this product all day long.

Hope that helps you with your purchasing decision.

Thanks for reading!

Buy AVF ES250B-T Wall Mounted AV Component Shelving System with 2 Adjustable Tempered Glass Shelves -Bl Now

I purchased this shelf to hold my cable DVR and my DVD player when I was relocating my flat-screen TV above my mantle. I didn't want to have a bunch of wires and items near the floor, so I wanted something attractive to hold the equipment that I could mount next to the TV.

Overall the shelves are a good value. The instructions are clear but in photo-only format. I glanced over them but, being a guy, I forged ahead without understanding them at all. Luckily for me, the parts are really easy to figure out.

I was mounting the shelves in brick, so I did not encounter the problem that others have stated with regards to the drywall anchors. That said, I would never mount something like this in just drywall using the drywall anchors. The screws either need to go into a wood stud or you should use a toggle bolt/anchor bolt to get a good clamp on the other side of the sheet rock. If you don't know what a toggle or anchor bolt is, don't be afraid -they are actually easier to use than you think and you can see a sample right here (http://www.amazon.com/Plated-Steel-Toggle-Slotted-Length/dp/B00137CITU/ref=sr_1_10?ie=UTF8&qid=1330713516&sr=8-10). Just drill a hole, slip the toggle bolt into place with the shelf backing in the middle, and stick it through the hole, then use a screwdriver to tighten.

Once mounted it was easy to feed the wires through the built-in spaces to collect them nicely. The shelves took about five minutes to screw in with the supplied allen.

-----

For those of you using the supplied drywall anchors, let me make a suggestion -drill a smaller hole FIRST, as a pilot hole. And if you are using a powerdrill, let the drill do the work, but don't put it on the highest speed available, and don't PUSH too hard to get the anchor in, otherwise, it'll smoosh it.

------

As far as instability, there are two types. There's the back mount piece that can be unstable, and then there's the shelf instability itself.

Regarding the back piece, I cannot say that was unstable since I mounted it in brick using lag bolts and sheaths. For those mounting in drywall, I suggest using toggle bolts instead.

Regarding the shelves themselves, they do rock back and forth quite a bit when they are put in place. The shelves aren't screwed in at all. instead, they fit inside a little clip and rest upon some rubber feet on top of the shelf support. I can see it being very easy to bump these shelves and have stuff fall down or off. Where I mounted the equipment this is not a big deal, but for others it may be. If you have a cat that likes to climb, I don;t think I would recommend getting these shelves unless they are out of the way.

-----------

PROs: attractive appearance, good price/value, easy install. Collects and hides wires well. A similar shelf unit retails for $149 at Best Buy.

Cons: shelves rock back and forth in the shelf clip, and feel a little insecure.

Read Best Reviews of AVF ES250B-T Wall Mounted AV Component Shelving System with 2 Adjustable Tempered Glass Shelves -Bl Here

I was looking for a cheap wall shelf unit, but I wish I would've shopped more. This unit is very visually pleasing; however, lacks stability. The drywall anchors that come with it don't work very well. I eventually made them work, but recommend getting other anchors if you have the choice. I got the anchors tight to the wall, but the shelves will sway side to side way more than I expect if bumped. The shelf looks very nice if you put it up away from contact, but I fear things may fall off them as wobbly as they are.

Want AVF ES250B-T Wall Mounted AV Component Shelving System with 2 Adjustable Tempered Glass Shelves -Bl Discount?

This unit is very sturdy if you use common sense when mounting it. Let's face it, you can't possibly think that drywall anchors will hold ANY shelving unit loaded with equipment(even if they give you the anchors with the shelf)! Seems like the biggest problem people,myself included, have is that they want to mount this unit centered below their TV and wall mounts for TV's commonly only hit 2 studs, so you can either try using drywall anchors to mount it in the center, or mount it off center so you can hit a stud. Neither of those sounded good to me so after tons of searching on Amazon, I was able to find a TV wall mount that was wide enough to hit 3 studs (GENIUS!) and thus have a stud directly centered below the TV. Try the VideoSecu Ultra Slim TV Wall Mount Fits most 37" to 63" LED LCD Plasma Flat Panel TV's, it is holding a Toshiba 55" LCD tight to the wall(1-1/4") and is also plenty strong enough as well as being reasonably priced. The shelving unit (screwed directly into the stud) is SUPER STRONG-you will break the glass shelf before you can pull it off the wall. Long and short of it, this unit is affofdable, really stylish, shelves are perfectly sized, and extruded aluminum wall mount is strong but it MUST BE MOUNTED TO A STUD. Very satisfied-was better than I expected (not made in China).

Save 50% Off

Friday, August 29, 2014

Three Shelf Corner Caddy in Chrome Plate

Three Shelf Corner Caddy in Chrome PlateWe have a tiled shower/tub with textured tiles, so anything relying on suction-cups was a no-go from the beginning. The ceiling is _high_, so the compression-pole caddies didn't work very well (they were either too loose, too tight, or too friggin' ugly).

The front, inside corner of the tub has _just_ enough space to hold this, though the middle foot hangs off in space because of the slope of the edge of the tub. Despite this, the unit is VERY stable, and holds all of our stuff (my wife has more shampoos and junk than should be legal, so that's saying a lot), with the tall bottles having enough space to fit perfectly.

We've had this for months, and there's no rust, etc.

There have been no problems.

Measure everything to make sure it will fit. To go with the measurements listed, assume it's going to take up about 9.75 inches from the corner (radially). That's what it does in our shower...

This thing stinks although it has a nice design, doesn't take up too much space, and is fairly sturdy I have had it for a month and it is starting to rust! It claims to be rust proof chrome wire, but even without scratches in it I now have noticeable rust along some of the joints and around the base on the tile. Save yourself the aggravation and try something else!

Buy Three Shelf Corner Caddy in Chrome Plate Now

This Caddy works well and holds alot of items. Ive had others that would tip over, but this one does not. The down side is that it can get pretty nasty underneath if you don't move it out of the way and clean it regularly. Like anything metal you buy for the shower, it will rust over time, though I had mine for about a year before I saw any rust on it. All in all, I kept it for about two years and was satisfied. If you want to make it last longer, you might want to spray some rustolium on it and keep it out of the direct stream of water.

Read Best Reviews of Three Shelf Corner Caddy in Chrome Plate Here

I bought this a few months ago, and, before using it, followed some advice I had been given for a previous shower caddy, which was to spray it before using with some clear Rustoleum. I gave it two coats (one coat each day, for two days), and let them dry. We live on the coast, where things rust and get moldy pretty quickly, but so far it's been holding up great.

This caddy is really great. I have a ridiculous amount of hair and shower products, and this holds them all. It has a small footprint, and the metal has a nice design so that it looks nicely made, and not cheap at all.

It also sits nice and flat on our shower floor, which is composed of very small 4x4" tiles; it doesn't wobble or move at all.

Overall, a fantastic purchase!

Want Three Shelf Corner Caddy in Chrome Plate Discount?

I was so happy when I 1st received this shower shelf. All my shampoos, conditioners, body scrubs, razors, etc fit neatly in one corner. However, my happiness was short lived as it began to rust within a couple of days of use, leaving a horrible rust stain on my marble shower. I bought some rust free, chrome colored spray paint today and repainted it. I really hope this does the job!!!

Save 56% Off

Monday, August 11, 2014

Rubbermaid FastTrack Rail

Rubbermaid 5G77 FastTrack Rail, 84-InchThis product is great if you are looking to clean and organize your space. Once installed onto the wall, you can use various hooks and attachements to your preference.

The only tricky thing is finding the studs behind your wall. Since the pre-drilled holes within the FastTrack rail are spaced where they are looking for an evenly spaced 16" between each studs.

As you know, while 16" stud spacing is the norm, this is not always the case. I have found that my garage did have mostly 16" spacing between studs, but sometimes a stud could have a 14" spacing.

My solution is to use a drill bit and to actually drill a new hole into the FastTrack rail. This works wonder since you do not have to rely on the pre-drilled holes if your studs are not spaced perfectly.

This way, you can ensure that you have at least 4 studs to attach this rail with. This would permit a maximum load capacity of 1500 pounds!

Oh, and to find a stud, it's best to use a stud finder and mark the "LEFT" and "RIGHT" edge of a stud. Then use a small nail and hammer it in between the "LEFT" and "RIGHT" edge. If the small nail "sticks" to a stud, you will feel resistance. If the small nail goes right through the drywall with no resistance, then you know that the stud is not there.

Don't worry about making too many nail holes since the FastTrack will cover it up. Just make sure that your nail holes are within the area that you wish to install the FastTrack.

Have fun decluttering!

To reinforce earlier comments: I installed tracks of several different lengths. Each track came with instructions advising that, to achieve the rated weight capacity, the first and last set of holes of the track should be mounted to studs. In each case, however, the track as supplied by the factory makes it impossible to follow the directions. The first and last mounting holes of the 48 inch track are 47 inches apart, the first and last holes of the 32 inch track are 31 inches apart, and so on. In each case, one but not both ends could be solidly anchored to a stud. It is difficult to imagine how this idiocy would have gone unnoticed during the planning for the product roll-out. This is not a product from an amateurish company operating on a shoestring budget. I have not been in a Home Depot or Lowes on the East Coast that has not had multiple in store displays of the Rubbermaid FastTrack system, complete with color brochures.

Nonetheless, the problem is not fatal. You can, as noted by others, drill extra holes in the metal, or you can add multiple sets of expanding metal hollow wall anchors or toggle bolts in the areas where you miss a stud. The tracks that I installed seem solid.

Another correctable problem you might run into: On some exterior garage walls, studs might have their long sides parallel rather than perpendicular to the drywall. That means that the 2-inch screws supplied in the Rubbermaid kits will have you drilling into brick or some other material that is better left alone. 1 3/4 inch screws, along with extra anchoring per above, should give you tracks that hold a substantial amount of weight. (Overall, the Rubbermaid hardware kits were mostly useless to me. I could not use many of the 2-inch screws, and I found metal hollow wall anchors to be much more secure than the plastic toggles provided by Rubbermaid.)

In sum: Though designed by some person (or team) who forgot that the standard spacing of studs is 16 inches on center, the product works fairly well. It is versatile, uncluttered, reasonably attractive, and it seems like it can survive the extremes of cold, heat, and humidity that one might find in a garage or basement. There is some talent that went into the product--and some stupidity. I am glad that its designer or designers decided to work on home organization systems rather than roadways, medical equipment, or troop carriers.

Buy Rubbermaid FastTrack Rail Now

I have been searching for a durable, easy to use garage shelving system and found one in the Rubbermaid fasttrack system. I previously purchased Rubbermaid configurations closet systems with great success and so I was glad to see Rubbermaid had a system for the garage. I am a woman who enjoys do-it-yourself projects but I am by no means a pro at it. After finding the fasttrack system I designed my garage around using it. I really wanted shelves to get items off the garage floor. I was very dismayed to see that Amazon's prices for the system were expensive. For six shelves I was going to pay almost $500 (when you add everything together--it is all sold separately). I went to Home Depot and by chance found everything for half or more than half the price. I did have trouble with the studs and aligning the rails. I had to go back to the drawing board and make changes since my studs didn't match up with my design. It all worked out. Know that each piece for this system is sold separately, including the brackets (For example,th brackets are sold one to a package and you will need three to hold up one shelf--$4.97 each at Home Depot.) Likewise the uprights are sold separately but you will need three to hold up a 4' shelf. I love the ease of just clipping on whatever accessories you are using directly onto the rail. Very easy and eliminates more drilling. I included a picture of the finished product under customer images. I am very pleased once again with Rubbermaid. Just be sure to shop around for the best price!

Read Best Reviews of Rubbermaid FastTrack Rail Here

Great product which offers a lot of options thanks to the various accessories developed by Rubbermaid. I've installed 2 of these tracks & been very satisfied with the ease of installation as well as the quality and finish of the product; especially when compared to Closetmaid version which I've also installed & will never use again. You will need a 4'level, drill, and 2-specific size drill-bits, & screwdriver to install it; but it's very simple & straight forward. Mounting screws & hardware are provided.

Want Rubbermaid FastTrack Rail Discount?

Very easy to install. Very stronge wall anchors provided. Looks very clean after installation. i would strongly recommend this product

Save 50% Off

Friday, April 11, 2014

ALESW504824SR - Alera Industrial Wire Shelving Starter Kit

ALESW504824SR - Alera Industrial Wire Shelving Starter KitThe product is exactly as described and shipping was incredibly fast! I received the email stating that it shipped and then that same day it was at the door! Not even sure how that was possible, but I'm extremely happy!

Save 47% Off

Wednesday, April 2, 2014

(CN-418) Solid Wood Recessed in the wall Niche Shelf, 18"H, multiple colors

(CN-418) Solid Wood Recessed in the wall Niche Shelf, 18'H, multiple colorsI am pleased, but not thrilled, with the wall niche. I ordered beige and the one I received was pale green. It fit in OK with my decor so I decided to keep it rather than deal with the hassle of returning it. It was not real difficult to install; however, it was 1/2 inch too deep for my wall, which I thought was a pretty standard-sized wall for a private home. My brother and cousin got some 1/2 inch molding and glued this around the back before glueing the whole thing into the wall. Now installed, it is lovely and I like it. Oh, one other problem was that there were no pegs included to hold up the shelves. Luckily, they fit in very tightly and I'm not putting anything heavy on them. The workmanship on the product is good.

Save 19% Off

Tuesday, January 21, 2014

Welland 60 Inch x 3.25 Inch x 5.25 Inch Corona Crown Molding Wall Shelf Espresso

Welland 60 Inch x 3.25 Inch x 5.25 Inch Corona Crown Molding Wall Shelf EspressoI have been looking for something that would give me a finished look to my fireplace. I had no mantel and it looked kinda bare. I thought about shelves and started looking on the internet. When I came accross this photo of a shelf I knew it would be what I was looking for. Very pleased how it looks and makes my fireplace look like a finished mantel. I would recommend this shelf if you are looking for a particular use for it.

This shelf was well wrapped and protected in the box. It is very lightweight and hollow on the back which is great for my plaster walls. It might be a bit of a challenge to hang if your walls are not completely flat, as it comes with some interesting hardware--blocks of wood that the shelf hangs on once they are attached. It is holding up great, looks like real stained solid wood and is holding 6 items above my tv. Great shelf for the price.

Buy Welland 60 Inch x 3.25 Inch x 5.25 Inch Corona Crown Molding Wall Shelf Espresso Now

UPDATE: I ordered this item and when it arrived, it was clearly not put together properly. I wrote a review and gave this a 1. I ended up taking it apart and re-glueing and repainted it.

I was contacted shortly after the review by Aaron and was given a couple of options to make this better. I asked Aaron to send another and if it was to quality I would consider revising my rating. Aaron did this and I got the replacement today. I looked over the packaging and opened the box. Unfortunately this one arrived in the same condition. I took photos and forwarded them to Aaron and noted there must be a manufacturing issue. Aaron responded almost immediately and was going to send out a third but it was out of stock. By the way this was all free of charge, including shipping. I opted to have my money refunded.

I have to give Aaron credit as he tried to make this right, and since he is refunding the full amount, I consider this closed to my satisfaction.

Read Best Reviews of Welland 60 Inch x 3.25 Inch x 5.25 Inch Corona Crown Molding Wall Shelf Espresso Here

Monday, November 25, 2013

(MS-324) 24" Floating Wall Mantle Ledge Shelf - 7.5" Deep, Solid Wood, Mounts on the wall using hid

(MS-324) 24' Floating Wall Mantle Ledge Shelf - 7.5' Deep, Solid Wood, Mounts on the wall using hidden cleat system!I needed floating shelves for my new apartment and had already purchased shorter ones, which I loved. So when these arrived and were installed nearby, they looked absurdly thick and bulky. As time passed, however, I got used to them and am able to put heavy display items on them.

Save 22% Off

Thursday, September 12, 2013

Victor Wood Corner Shelf, Midnight Black Collection (Black) (13.25"W x 9.75"H x 9.75"D)

Victor Wood Corner Shelf, Midnight Black Collection
  • Color: Black
  • Size: 13.25"W x 9.75"H x 9.75"D
  • Three shelves create perfect places for books, papers and folders
  • Rubber feet and solid construction reduce movement
  • Extra sturdy wood construction with precision fit corners

These are sturdy, good-looking, and well-made. Great for sorting paperwork in a small area of shelves, open and easy. The size fits very nicely on a bookshelf, and the little bumpers that come with it keep it from sliding around. Just what I wanted.

Buy Victor Wood Corner Shelf, Midnight Black Collection (Black) (13.25"W x 9.75"H x 9.75"D) Now

I was looking for an inexpensive fix for my cluttered desk. I have my Fuji scanner on the top and utilize the two shelves to sort items to scan and items to file. I file and scan every Friday. This corner shelf opened a huge area of my desk now for other work. It is a simple material so it may not last forever but it works great for now. If I can get 2 years out of it it works great! I like the streamlined look for me to keep a neat desk.

Saturday, August 31, 2013

Home Bar Lighting - 2' LED Lighted Liquor Bottle Display Shelf

Home Bar Lighting - 2' LED Lighted Liquor Bottle Display ShelfI purchased it to sit on my new bar which is white. The lights are absolutely delightful and sexy I would definately buy again from this company. Everything came packed nicely I love it.

Save 17% Off

Saturday, August 17, 2013

Mr. Light Grow Light Pro with 4 Linked 8-Watt Grow Lights and Adjustable Shelf

Mr. Light Grow Light Pro with 4 Linked 8-Watt Grow Lights and Adjustable ShelfMy seedlings grew quite well last season. You can't grow too much at once because of the size of the unit, but since I have just a small garden plot and grow just more finicky stuff under the lghts, it was just fine for me. When I bought it about a year ago, it said it has extra bulbs, but it didn't. I didn't want to bother contacting them, but I should have 2 of the four bulbs are not working anymore and replacement 4 pack is over 39 dollars with shipping. I tried to search for 8W T5 grow lights from the other stores, but 1 foot length seems to be not standard, they usually come in 2 and 4 feet, so it looks like getting them from Mr.Light is the only option. If you know, where else I could get them, leave a comment.

On the positive side, stand looks good(I bought the one in stainless steal finish), is pretty sturdy, and works well. You can also put on just the bulbs you want as each of them has separate switch. It is a nice product overall. Just be aware, that you will have to spend 40 dollars each year for that little space to grow a few seedlings.

I've got the whole thing assembled only to find out that two lights in each of the packages don't work. I don't think I should be required to take the thing apart and repackage it just to try again to get a grow light with bulbs that actually work. I love buying from Amazon but this is very disappointing.

Buy Mr. Light Grow Light Pro with 4 Linked 8-Watt Grow Lights and Adjustable Shelf Now

I bought this because I really liked it, but the clear trays don't seem to fit. I have tried them on the bottom under the legs, don't fit. I have tried them on top of the wire rack, don't fit except at an angle. I don't know what I am doing wrong.

Read Best Reviews of Mr. Light Grow Light Pro with 4 Linked 8-Watt Grow Lights and Adjustable Shelf Here

Is pretty but not bright enough for my plants. Wish they could change to a bigger light and more solid meterials.

Want Mr. Light Grow Light Pro with 4 Linked 8-Watt Grow Lights and Adjustable Shelf Discount?

Monday, August 5, 2013

HON Metal Bookcase

HON Metal Bookcase, 3 Shelves, 34-1/2 W by 12-5/8 D by 41 H, BlackI have tons of books. Hundreds. I needed some more space and I didn't want to buy any more particle board Ikea junk such as I have been doing for years. So I splurged on this metal book case. I've seen these things in offices for years and decided I wanted one. I don't regret it. This thing is solid and will last. Metal is definitely superior to wood in this case.

This was for my husband's extra books after we moved. It is sturdy, and is exactly as described. We wanted it for the basement so it is perfectexcept he could use another one! We would order it again.

Buy HON Metal Bookcase Now

I am extremely pleased with this bookcase. It is rather solid and will last for many years. It was delivered in a timely manner as well.

Read Best Reviews of HON Metal Bookcase Here